[access-uk] Re: Maximizing windows in MS Access
- From: "Griffiths, Steve" <Steve.Griffiths@xxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 4 Feb 2009 10:12:07 -0000
Dave,
Here are some notes I wrote for Access 97 - the same general method
seems to work for Access 2007, and so I presume all versions in between.
1. Create a new macro - in Access 97, open the View menu, Database
Objects submenu and choose Macros, then Tab to the new button and press
it. In Access 2007, go to the Create tab on the ribbon and choose Macro,
which is right at the end of the lower ribbon.
2. You should be in a drop down list. In both versions of Access, press
Alt + DownArrow to open the list and choose Maximise
3. Press Control + S to save the macro and name it Autoexec. This macro
is run whenever the database first opens.
That should do it.
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of Ankers, Dave (UK)
Sent: 04 February 2009 09:27
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Maximizing windows in MS Access
Hi all,
Does anyone know how to set MS Access to maximize everything on start
up?
I know there is a keystroke available to maximize windows in access,
when I find what it is, but if I could set it to always maximize on
start up, that would be a lot easier.
Thanks in advance.
Cheers
Regards
Dave Ankers
********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
DISCLAIMER:
NOTICE: The information contained in this email and any attachments is
confidential and may be privileged. If you are not the intended
recipient you should not use, disclose, distribute or copy any of the
content of it or of any attachment; you are requested to notify the
sender immediately of your receipt of the email and then to delete it
and any attachments from your system.
RNIB endeavours to ensure that emails and any attachments generated by
its staff are free from viruses or other contaminants. However, it
cannot accept any responsibility for any such which are transmitted.
We therefore recommend you scan all attachments.
Please note that the statements and views expressed in this email and
any attachments are those of the author and do not necessarily represent
those of RNIB.
RNIB Registered Charity Number: 226227
Website: http://www.rnib.org.uk
This message has been scanned for viruses by Websense Hosted Security -
http://www.websense.com/content/HostedEmailSecurity.aspx
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
