[access-uk] Re: KEYNOTE OLD (OLD) SYNTHESIZER - FIRMWARE UPGRADES
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Tue, 4 Jul 2006 15:22:18 +0100
Hi Doris,
Slight correction. You don't need any Humanware drivers if you have
Window-Eyes, as Window-Eyes addresses the synthesiser directly. It is only
JFW, and possibly Hal, where you need the extra drivers. This is one thing
I love about Window-Eyes, GW Micro always support the synthesisers directly,
so no additional drivers are needed.
All the best
--
Computer Room Services: the long cane for blind computer users.
Telephone Low-call: 08452 606 277
International: +44(0)1438 742286,
Fax: +44(0)1438 759589
mobile: +44(0)7956 334938,
Email: mailto:Steve@xxxxxxxxxxxxxx
Web site: http://www.comproom.co.uk
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Chipmunks
Sent: 04 July 2006 11:05
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: KEYNOTE OLD (OLD) SYNTHESIZER - FIRMWARE UPGRADES
A Keynote SA should work under windows. If you want to have it work under
win NT (nt/2k/xp) you need to donwload the appropriate 32bit driver from the
humanware/Pulsedata website. it can be found somewhere in the Braillenote
support download section, the page where all the firmware upgrade for the
BN's can be downloaded from.
I have had my Keynote SA since 1998 and am not aware of there having been
any firmware upgrades for it during that time. IN fact, I never heard that
the Keynote's chip was flashable.
hth
Doris
At 10:52 AM 7/4/2006 +0100, you wrote:
>Hi all,
>
>Has anyone anywhere got relevant software and performed these upgrades
>for the Keynote in order that it will work successfully with Windows
>and faster computers. Currently selling a couple of ours, I have run
>into this problem and remember only doing one upgrade, once, early with
>the synth in DOS. In those days I really didn't know whether the
>upgrade had taken or not.
>
>Any information (hand holding) anyone can give on this would be more
>than welcome. Thanks!
>
>--
>Carol
>cdp49a@xxxxxxxxxxxx
>** To leave the list, click on the immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** access-uk-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.394 / Virus Database: 268.9.8/381 - Release Date: 7/3/2006
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.394 / Virus Database: 268.9.8/381 - Release Date: 7/3/2006
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.394 / Virus Database: 268.9.8/381 - Release Date: 7/3/2006
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
