[access-uk] Re: K1000 PROBLEM
- From: "simon.dowling" <simodowl@xxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 8 Nov 2006 03:21:26 -0000
hi ok me thinks we're loosing the thread here a bit.
when you start your pc, if you go in to the run dialog box type in:
Services.msc
locate the audio spooler and right click on it, then choose end process.
then reload the service by right clicking and choose start, this should have
cleared the spooler and you should have things back to normal.
hth
----- Original Message -----
From: "kevin cussick" <kevin.cussick@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, November 07, 2006 11:14 PM
Subject: [access-uk] Re: K1000 PROBLEM
Hi,
Yes Ray I would agree with You, I think it is the orpheious synth that
causes this problem I had this problem using Hal and other programs as
well.
I remember when I used Hal with total recorder and the sound driver you
are ment to be able to record the show you are recording and use your
screen reader at the same time but I could not do this using the Orpheus
synth!!!
But when I used a sappy voice it worked fine but I still like producer all
the best.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
