[access-uk] Re: Iphone IOS5 disappointment
- From: Elliott Barnes <elliottabarnes@xxxxxxxxxxxxxx>
- To: access-uk@xxxxxxxxxxxxx
- Date: Fri, 14 Oct 2011 10:30:06 +0100
The iPhone does in fact include an FM receiver, as detailed by iFix It:
Wi-Fi, Bluetooth, and GPS are all provided by Broadcom and located
beneath EMI shields on the front side of the board.
Broadcom BCM4329FKUBG 802.11n with Bluetooth 2.1 + EDR and FM receiver.
Broadcom BCM4750IUB8 single-chip GPS receiver.
At the moment, though, Apple obviously haven't used the receiver in iOS.
Cheers.
On 14/10/2011, Barry Hill <barry.hill3@xxxxxxx> wrote:
> Apparently, the chip is set up to receive FM. I'm just going by stuff I
> found on the net. Put Iphone fm radio app into google and it kicks out
> several links about the rumour.
>
> Cheers
>
> Barry
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
> Tristram Llewellyn
> Sent: 14 October 2011 9:27 AM
> To: 'access-uk@xxxxxxxxxxxxx'
> Subject: [access-uk] Re: Iphone IOS5 disappointment
>
> The iPhone does not have an FM antenna nor a FM radio in it so I don't know
> how that could be done.
>
> Regards.
>
> Tristram Llewellyn
> Technical Support
> Sight and Sound Technology
>
>
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
> Barry Hill
> Sent: 14 October 2011 09:24
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Iphone IOS5 disappointment
>
> I Hi all
>
> There's some great upgrades with the new operating system on the Iphone, but
> I was disappointed not to see an FM radio app. Apparently, Apple are
> developing an FM radio app but they are trying to make it so that you can
> order the tune you're listening to from Itunes. Sounds pretty cool, but
> when?
>
> Cheers
>
> Barry
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
