[access-uk] Re: Humanware problem

  • From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Fri, 22 Jan 2021 16:59:58 -0000

Somewhat stupid that you can't get the Trek to forget a Bluetooth device.

That and the ultra slow modem makes it a bit disappointing.

All the best

Steve

--
Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
T: +44(0)1438-742286
M: +44(0)7956-334938
F: +44(0)1438-759589
E: steve@xxxxxxxxxxxxxx
W: https://www.comproom.co.uk

-----Original Message-----
From: access-uk-bounce@xxxxxxxxxxxxx <access-uk-bounce@xxxxxxxxxxxxx> On
Behalf Of Whizza (Redacted sender "whizza8" for DMARC)
Sent: 22 January 2021 16:47
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Humanware problem

Mandy, the only way you can clear all devices from the trek is to do a hard
reset and then it forgets everything.
With the trek powered off, hold down the 2, 6 and 8 keys together and then
power on the trek.  After the welcome message, you should hear the word
menu.  Let go of all keys and arrow down with the eight key to clear user
profile and press the hash key.  When asked if this is what you want to do,
press hash again.  The trek will then power off.
The only thing is that you'll lose everything you've put in like your wi-fi
connection and your place in the book you're reading.  You will, though,
lose all blue tooth devices and you can start again from scratch and only
put in the devices you want.
Hope this makes sense.

Cheers,
Sandra.

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: