[access-uk] Re: Hive IOS app and Hive in general

  • From: Yusuf Osman <yusuf.osman@xxxxxxxxxxxxxxxxx>
  • To: "access-uk@xxxxxxxxxxxxx" <access-uk@xxxxxxxxxxxxx>
  • Date: Sun, 25 Nov 2018 14:21:59 +0000

Hi Kevin, I’ve been using the iOS app to control my heating for a number of 
months now. You don’t need to login each time you launch the app (at least I 
can’t remember the last time I had to login). The app itself is pretty 
accessible using a combination of swipes and placing a finger on the screen and 
moving around. I’m able to turn the heating on/off, adjust the temperature at 
which the heating turns off and set up routines (not something I do very often 
as I’m happy to just turn it on when I want it). When I initially set it up I 
set the app to switch to frost protect mode when off was selected so 
technically it is then set to 7 degrees and will turn the boiler on if the 
thermostat goes beneath this. I’m also able to control my lights through the 
app although tend to do this through my Echo normally. Can’t really comment on 
the distance of the thermostat to the Hive controller near the boiler as I live 
in a flat so it isn’t all that far.

My boiler doesn’t allow for Hive to control the hot water. It is a combination 
boiler and I seem to remember that most of those don’t allow any of the smart 
thermostats to control both heating and hot water.

HTH
Yusuf

Why not follow me on Twitter at:
yusuf_oy
Facebook:
/yusuf.osman.188

From: access-uk@xxxxxxxxxxxxx <access-uk@xxxxxxxxxxxxx> On Behalf Of Kevin Lloyd
Sent: 24 November 2018 13:31
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Hive IOS app and Hive in general

Hi all.

How is the accessibility of the Hive IOS app at present?  I saw some discussion 
a while back on this but couldn’t recall what the details were.

I also saw a criticism that you had to login every time you launched the app 
before you could do anything, is that still the case?

Any other observations on using Hive to control heating and hot water?

Any issues with the range of the wifi transmission from the hub to thermometers 
or to the boiler?  Our boiler is quite a distance from the router so wondered 
if anyone had experienced any issues with the hub and boiler controls where 
they are quite far apart?

Thanks.

Kevin

Other related posts: