Hi Paul Yes, got signals. It tuned in and got 31 channels. The engineer said it was only that many because that was all that the relay station that we can only pick up is putting out. Cheers Barry -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Paul Porter Sent: 09 October 2011 1:05 PM To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: Goodmans digibox and Sky Hi Barry Are you getting a signal through the Goodmans. Did it tune itself in and how many channels did it find? Paul ----- Original Message ----- From: "Barry Hill" <barry.hill3@xxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Saturday, October 08, 2011 6:26 PM Subject: [access-uk] Goodmans digibox and Sky > Hi all > > Does anyone have both working on the same tv ok? The engineer who fitted > the Smarttalk said that it would be fine as long as I only had the one > switched on at a time. However, even with the Sky box unplugged, the > Digibox isn't working. I could change the volume, although it was rather > slow at doing so, and managed to go up four channels, but nothing after > that. We changed the batteries in the remote, but that hasn't helped. > > Anyone had similar issues? > > Cheers > > Barry > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq