[access-uk] Re: GPS app for iOS

  • From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Thu, 2 Aug 2018 12:33:45 +0100

Hi Pete,

I wondered about that myself.  Although I don't use BlindSquare, I know it can 
give points of interest, not that I think it's very accurate, because it uses 
OSM, Open Street Maps and FourSquare data, which is inherently unreliable, but 
it works.

All the best

Steve

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx <access-uk@xxxxxxxxxxxxx> On Behalf Of pete gurney
Sent: 02 August 2018 09:23
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: GPS app for iOS

hi charlie,

i'm not sure why you think blindsquare needs apple or google maps to get points 
of interest because they don't use these for that information.
blindsquare uses 4square and open sorce infomation for telling you what is 
around you.
both when just walking along or when following a route blind square will tell 
you the points of interest that are withing the radius  you have set on the 
home screen.
by going into the filter settings you can tell it which catagories you want 
announced and which ones you don't want to be told about.
if for example why walking you wanted to find somewhere to eat you could tap on 
the food catagory on the home screen and it would bring you up a list of all 
the places to eat within your set radius and tell you which direction they are 
and you could pick one of them to be guided there.
if you go into tools from the home screen you could tap on around me and it 
will tell you all the things around you within your set radius and which 
direction they are, likewise in the tools section you could tap on look around 
and then it will only tell you about the things in the direction you are 
pointing the top of the phone towards.
so as you can tell blindsquare deffinately can and does tell you what is around 
you according to the options you have chosen no matter if your just walking or 
following a route by foot or in a vehicle.
i note you said a list of points of interest and it doesn't give you a list of 
the ones on the route you are following in advance but it will announce them to 
you when they come within the radius you have set.
and if you wanted to know what points of interest  are near a particular place 
for example your destination you could tell blindsquare to simulate that place 
and then look around at what is nearby using the same methods mentioned above.
blindsquare automatic announcement facility is really good and i think if you 
play around with the varios settings you will be able to fine tune it to work 
well for you.
i often use blindsquare when travelling by vehicle whilst following a route and 
it automatically tells me about the points of interest as they come in range 
which is very handy as i often learn of things that i didn't know were there.

pete.

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: