[access-uk] Re: GPS app for iOS

  • From: pete gurney <pete@xxxxxxxxxxxxxxxxx>
  • To: access-uk@xxxxxxxxxxxxx
  • Date: Thu, 02 Aug 2018 09:23:06 +0100

hi charlie,

i'm not sure why you think blindsquare needs apple or google maps to get points 
of interest because they don't use these
for that information.
blindsquare uses 4square and open sorce infomation for telling you what is 
around you.
both when just walking along or when following a route blind square will tell 
you the points of interest that are
withing the radius  you have set on the home screen.
by going into the filter settings you can tell it which catagories you want 
announced and which ones you don't want to
be told about.
if for example why walking you wanted to find somewhere to eat you could tap on 
the food catagory on the home screen and
it would bring you up a list of all the places to eat within your set radius 
and tell you which direction they are and
you could pick one of them to be guided there.
if you go into tools from the home screen you could tap on around me and it 
will tell you all the things around you
within your set radius and which direction they are, likewise in the tools 
section you could tap on look around and then
it will only tell you about the things in the direction you are pointing the 
top of the phone towards.
so as you can tell blindsquare deffinately can and does tell you what is around 
you according to the options you have
chosen no matter if your just walking or following a route by foot or in a 
vehicle.
i note you said a list of points of interest and it doesn't give you a list of 
the ones on the route you are following
in advance but it will announce them to you when they come within the radius 
you have set.
and if you wanted to know what points of interest  are near a particular place 
for example your destination you could
tell blindsquare to simulate that place and then look around at what is nearby 
using the same methods mentioned above.
blindsquare automatic announcement facility is really good and i think if you 
play around with the varios settings you
will be able to fine tune it to work well for you.
i often use blindsquare when travelling by vehicle whilst following a route and 
it automatically tells me about the
points of interest as they come in range which is very handy as i often learn 
of things that i didn't know were there.

pete.

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: