[access-uk] Re: Disappearing podcasts with the Stream

  • From: "Adrien Collins" <adriencollins22160@xxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Mon, 29 Sep 2014 22:43:27 +0200

Hi 

I was beta testing this new stream software, I had the same
problem, if you don't mind I will write to humanware and
tell them although I did report it at the time via the
official channels. I had 30 plus feeds in the stream, I
wanted to delete one and a load were deleted, it is not a
one off I am sure.

Regards

Adrien


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Yusuf Osman
Sent: Monday, September 29, 2014 10:05 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Disappearing podcasts with the
Stream

Adrien, Have you had the same problem then? I have spoken to
Humanware today and I've managed to replicate the problem.
Andrew suggested reformatting the internal memory, which
caused it to return to the proper amount of free space. But
after I subscribed to some of my previous podcasts the same
thing happened again. Hopefully someone in Canada will be
able to sort out a fix.
Yusuf

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Adrien Collins
Sent: 29 September 2014 20:33
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Disappearing podcasts with the
Stream

Hi 

It is a bug, you need to report it.

Regards

Adrien


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Yusuf Osman
Sent: Saturday, September 27, 2014 2:00 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Disappearing podcasts with the Stream

Afternoon, I updated to the latest firmware and have been
enjoying the ability to subscribe

and listen to podcasts natively on the stream. I had 29
podcast feeds with episodes

leaving around 600MB on internal memory. Last night, for no
reason that I could see,

my podcasts suddenly dropped to 10. I tried removing the SD
card, turning on the

unit, and then putting the SD card back in, to see if that
would remind the Stream

of the other 19 feeds. Instead of doing that, it forgot all
of them. So, according

to the Stream I now have 0 feeds. However, the podcast
episodes must still be there

as the internal memory still says there's around 600MB left.

Has anyone else experienced this, is there any way of
getting the feeds back without

having to resubscribe to them all.

Is there any way of accessing the internal memory to remove
those episodes so that

if I do have to resubscribe to the podcast feeds I'll have
the space to download

them all again.

Thanks

Yusuf


** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: