Thanks Ibrahim. That confirms what I had been able to find out, I.E. there is nothing out there . Regards, John. -----Original Message----- From: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx] On Behalf Of Ibrahim Gucukoglu Sent: Sunday, January 13, 2013 6:29 PM To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: Controlling Sky Hi John. Alas unfortunately not, you only have the IOS app at the moment and even that isn't too accessible. Its workable but it is very hit and miss, at least it was last time i used it. All the best, Ibrahim. -----Original Message----- From: John Farley Sent: Sunday, January 13, 2013 2:59 PM To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Controlling Sky Hello list, In the January edition of Access-it there is an article about an Ap for Ipad, IPhone etc. that will provide full control of a Sky unit from that device running under the IOS operating system.. I do not have any of those devices. While I do have a Sky Talker unit, this does not provide any access for recorded material. Is there a PC program available similar to the IOS Ap? I have searched around but cannot find one. Regards, John. ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq