[access-uk] Re: Can't enter WIFI Key
- From: "Dj Paddy" <mygroups@xxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sat, 26 May 2007 14:44:37 +0100
It seems it's asking for a WEP key.
Anyone know how to toggle this to WPA?
It's very odd as the other machine on the network accepts the key fine but
this thing keeps demanding for a WEP key. Even though it's never connected
to a WIFI connection in it's life.
Dj Paddy
Ôà
----- Original Message -----
From: "Dj Paddy" <mygroups@xxxxxxxxxxxxx>
To: <bcab@xxxxxxxxxxxxx>
Cc: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, May 26, 2007 2:01 PM
Subject: [access-uk] Can't enter WIFI Key
Hi all,
I'm trying to use PSK Personal and TKIP for the security settings.
I've only used WEP in the past but am switching because of the security
concerns with WEP.
I enter my key.
This is a mixture of alpha and numerical characters.
I do this, the gateway reboots and when I try to enter the key on the wifi
enabled PC I get,enter the
Wireless configuration
The network password needs to be 40bits or 104bits depending on your
network configuration.
This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal
characters.
With an OK button.
Maybe I'm not getting the format right in the key?
I'll be changing this but here is the key I was going to use. Can anyone
see something wrong with this?
FiCn88SsiLLwq12875NmCzrShGw
That's 27 characters and according to my router I can have between 8 and
63 characters in this key...
I'm at a loss. I've tryed dropping it to 26 characters but still the same
messege.
Any ideas?
Dj Paddy
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
