Hi, well when I got the "Full-up" message, I put on a poetry CD and it just kept loading the thing, when I finally stopped it and listened I had half the CD on so I think it was a good way of filling it up. Maybe if you finish it off with some music, you too will find when it cuts-off with that "No Space" message, you'll have at least some of your music CD on it, saves having so much empty space then. Christine. ----- Original Message ----- From: "Kevin Lloyd" <kevin.lloyd3@xxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, August 30, 2007 4:47 PM Subject: [access-uk] Re: CREATIVE ZENSTONE 1GB > Hi Carol. > > That's entirely normal and is the case for all hard drives and flash memory. > Just take a look at the properties of your hard drive and you'll see a > similar and apparent loss of disc space. > > I'm not 100% sure of the maths but I think it's calculated as > 1000000000 bytes of your zen flash memory > divided by 1 kb which is 1024 bytes > resulting in a useable capacity of 977 meg. > > Regards. > > Kevin > E-mail: kevin.lloyd3@xxxxxxxxxxxxxx > ----- Original Message ----- > From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> > To: "Access UK Mailing List" <access-uk@xxxxxxxxxxxxx> > Sent: Thursday, August 30, 2007 2:43 PM > Subject: [access-uk] CREATIVE ZENSTONE 1GB > > > > Hi all, > > > > I have been a little surprised to notice the amount of free space which > > remains on the Zenstone when there appears to be "no room" to add another > > track. I've noticed this with both my Zenstone and also Mike's. > > Currently I see he's used 961,040,384 and there's 916MB reported free. > > This seems quite a lot of wasted space to me... > > > > Has anyone else observed this? Is it acceptble? Is some of the space > > needed for indexing, perhaps, that doesn't show up as such? > > > > Just curious and of course I'd like to get yet more onto the Zen! > > > > -- > > Carol > > carol.pearson@xxxxxxxxxxxx > > > > > > ** To leave the list, click on the immediately-following link:- > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** access-uk-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on the > > ** immediately-following link:- > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq