[access-uk] Re: BT Voyager
- From: "Dj Paddy" <mygroups@xxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 10 Sep 2006 13:39:34 +0100
Hi thanks for that.
I also found the manual online in pdf.
Odd that it's not on the cd.
Barry
Ðà
----- Original Message -----
From: "Andrew Hodgson" <andrew@xxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, September 10, 2006 1:28 PM
Subject: [access-uk] Re: BT Voyager
Hi,
The Voyager 2100 and 2110 also are set up for the UK, so that is VC0, VPI0
VCI38. On some models you have to set this manually, and if you haven't
encountered it before, it's a bit of a chore to go through and work out what
the settings are.
I haven't seen some of the newer models however - if I remember correctly
the setup CD will present the user with details, and then send commands to
the router to get it set up. This is done in Flash and a couple of other
things, and it installs BT Broadband helper software which is not
accessible.
If admin/password doesn't work, try admin and admin for the username and
password. If the IP address doesn't work, do an ipconfig and use the
default gateway as the router IP address.
Thanks.
Andrew.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Dj Paddy
Sent: 10 September 2006 13:14
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: BT Voyager
That's cool Andrew.
That's easy. I knew that was the url for Linksys routers but didn't realise
it was one to try at first for most.
Barry----- Original Message -----
From: "Andrew Hodgson" <andrew@xxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, September 10, 2006 1:10 PM
Subject: [access-uk] Re: BT Voyager
Hi,
D
Epending on which model she has, it is usually http://192.168.1.1 with the
user of admin and the password of password.
Remember to plug in a splitter to other phone sockets on the same line that
have a phone connected - eg Sky digital boxes, phones etc.
Thanks.
Andrew.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Dj Paddy
Sent: 10 September 2006 12:48
To: access uk
Subject: [access-uk] BT Voyager
Hi all.
My girlfriend is having BT Total Broadband installed tomorrow.
Never having used ADSL before I'd like a quick heads up.
Please could somebody confirm the following and also give me the url for the
routers web utility?
On the cd there's no manual! Only a brief tutorial which doesn't give ya
that useful snippit.
I'm guessing the procedure will go like this.
1. Man comes to install line.
2. I plug the filter into the phone line.
3. I plug a phone wire into the end of the filter and plug it's end into a
free socket on the router.
I know how to connect it to the PC having looked at the equipment last
night.
Is it necessary to run the installation cd or is this extra fluff?
Thanks guys.
Bary
Ðà
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 1.1746 (20060908) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 1.1746 (20060908) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
