[access-uk] Re: Adding E-mail To My Contacts in N95
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 7 Dec 2008 18:59:06 -0000
Hi Eleanor,
You need to go to Add Detail to add mobiles and other numbers to an existing
contact.
All the best
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Eleanor Burke
Sent: Sunday 7 December 2008 14:48
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Adding E-mail To My Contacts in N95
Well Amro
I am looking at this again. I also noted Steve's comment re Clive's
suggestions. Bow I appreciate all 3 of you taking time to assist me. Think
is if I set defaults then that too can have its drawbacks in that I will
want to use call, text and e-mail. Where I am having the problem is that I
want to add e-mail addresses. Now that is fine if I receive an e-mail from
someone I can save their e-mail address (I discovered) but for those that
have not yet responded which I have not accessed yet through my mobile. I
want to add them in and here is wher I get confused. I thought I would go
to Edit but that does not allow me to put in an e-mail address. I also have
this problem where I have someone's mobile and then I get a landline number
for them, I cannot put in via Edit either. This ends up with me having them
in twice, onece mobile and once landline. I lshould not have to do that.
Eleanor
----- Original Message -----
From: "Amro Bilal" <amro_bilal@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, December 06, 2008 3:59 PM
Subject: [access-uk] Re: Adding E-mail To My Contacts in N95
> Eleanor, go to Contacts, open the contact you need to configure by
> selecting it, open the Options menu (key one), arrow down to Defaults,
> select it and you can specify what defaults are used for that contact from
> there such as phone number, text message number, email address etc.
>
> Cheers,
> Amro
> ----- Original Message -----
> From: "Eleanor Burke" <eleanorburke@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, December 06, 2008 3:31 PM
> Subject: [access-uk] Re: Adding E-mail To My Contacts in N95
>
>
>> Clive I tried this actually and then I went to send an e-mail and for
>> instance it kept saying Rosie Mobile when I wanted it to say Rosie
>> E-mail. I had no way of checking if it was going to be her mobile or
>> e-mail that would come up because as I say it insisted on Rosie Mobile.
>>
>> Eleanor
>> ----- Original Message -----
>> From: "Clive Pallett" <clive.pallett@xxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Saturday, December 06, 2008 3:17 PM
>> Subject: [access-uk] Re: Adding E-mail To My Contacts in N95
>>
>>
>>> Hello Eleanor,
>>>
>>> Glad to hear you have e-mail set up on your phone.
>>>
>>> When editing a contact, choose edit and then you need to go into options
>>> again. You can quickly do this by pressing the joystick in. The first
>>> option is Add Detail. Select this and you can choose one from the list,
>>> which is quite long, so arrow down to E-mail. You can add as many
>>> details to a contact as you wish.
>>>
>>> Hope this helps.
>>>
>>> Best wishes,
>>>
>>> Clive Pallett
>>>
>>>
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>
>>
>> --
>> I am using the free version of SPAMfighter.
>> We are a community of 5.7 million users fighting spam.
>> SPAMfighter has removed 921 of my spam emails to date.
>> Get the free SPAMfighter here: http://www.spamfighter.com/len
>>
>> The Professional version does not have this message
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
--
I am using the free version of SPAMfighter.
We are a community of 5.7 million users fighting spam.
SPAMfighter has removed 930 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
