Eleanor
go to contacts, find the one you want to add email addresses for, then
press options and go down to edit. Now go options again and add new
detail. This brings up a list which you can choose from. Select email
from the list-it is quite a long one, ok that and input the address,
pressing key 2 when done. You should by rights be sorted with that now.
Any more problams let us know.
Also if you need these instructions separated out I can do that too.
Erica.
--------------------------------------------------
From: "Eleanor Burke" <eleanorburke@xxxxxxxxxxxxxx>
Sent: Sunday, December 07, 2008 2:47 PM
To: <access-uk@xxxxxxxxxxxxx>
Subject: [access-uk] Re: Adding E-mail To My Contacts in N95
Well Amro
I am looking at this again. I also noted Steve's comment re Clive's
suggestions. Bow I appreciate all 3 of you taking time to assist me.
Think is if I set defaults then that too can have its drawbacks in that
I will want to use call, text and e-mail. Where I am having the
problem is that I want to add e-mail addresses. Now that is fine if I
receive an e-mail from someone I can save their e-mail address (I
discovered) but for those that have not yet responded which I have not
accessed yet through my mobile. I want to add them in and here is wher
I get confused. I thought I would go to Edit but that does not allow me
to put in an e-mail address. I also have this problem where I have
someone's mobile and then I get a landline number for them, I cannot put
in via Edit either. This ends up with me having them in twice, onece
mobile and once landline. I lshould not have to do that.
Eleanor
----- Original Message -----
From: "Amro Bilal" <amro_bilal@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, December 06, 2008 3:59 PM
Subject: [access-uk] Re: Adding E-mail To My Contacts in N95
Eleanor, go to Contacts, open the contact you need to configure by
selecting it, open the Options menu (key one), arrow down to Defaults,
select it and you can specify what defaults are used for that contact
from there such as phone number, text message number, email address
etc.
Cheers,
Amro
----- Original Message -----
From: "Eleanor Burke" <eleanorburke@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, December 06, 2008 3:31 PM
Subject: [access-uk] Re: Adding E-mail To My Contacts in N95
Clive I tried this actually and then I went to send an e-mail and for
instance it kept saying Rosie Mobile when I wanted it to say Rosie
E-mail. I had no way of checking if it was going to be her mobile or
e-mail that would come up because as I say it insisted on Rosie
Mobile.
Eleanor
----- Original Message -----
From: "Clive Pallett" <clive.pallett@xxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, December 06, 2008 3:17 PM
Subject: [access-uk] Re: Adding E-mail To My Contacts in N95
Hello Eleanor,
Glad to hear you have e-mail set up on your phone.
When editing a contact, choose edit and then you need to go into
options again. You can quickly do this by pressing the joystick in.
The first option is Add Detail. Select this and you can choose one
from the list, which is quite long, so arrow down to E-mail. You can
add as many details to a contact as you wish.
Hope this helps.
Best wishes,
Clive Pallett
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
I am using the free version of SPAMfighter.
We are a community of 5.7 million users fighting spam.
SPAMfighter has removed 921 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
I am using the free version of SPAMfighter.
We are a community of 5.7 million users fighting spam.
SPAMfighter has removed 930 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
