Does the cursor mode for letters work on that version? I currently have
Version 2.003 (think that's what it said). I have the standard edition.
Does that mean other payment, anyone know?
--
Carol
carol.pearson@xxxxxxxxxxxx
----- Original Message ----- From: "Chris Hallsworth"
<christopherhallsworth71@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, January 09, 2008 4:56 PM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...
Clive and all, Talks 3.51.1 doesn't exist for second edition phones. As I
stated in an earlier message, the latest, and I mean the latest, is
3.20.2. Just wanted to clear any ambiguities that may have been caused.
At 15:27 09/01/2008, you wrote:
Hello Carol,
Depending on how old your version is, you may have to pay for the
upgrade. If I am correct, to upgrade from an earlier version to 3x is
£50. This is also true when upgrading from the standard to the premium
edition. You can find out your current version by going into Talks
settings and pressing soft key 1, options, select about and this will
give you your current version. Press soft key 1 again to exit this
information.
You say you have the 6630, this is a second edition phone and you can
find the latest version of Talks, 3.51.1 on Steve Nutt's site at:
www.comproom.co.uk
You can change how the cursor behaves so when you are arrowing
left/right you can have the cursor mode for letters, words, or original,
which means when you have a list of messages you move from one to the
next.
I hope this is helpful and maybe others on the list can help with
installation.
Best wishes,
Clive Pallett
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
