[access-uk] Re: 64 Gigabyte Transcend SD Caards
- From: "Adrien Collins" <adriencollins22160@xxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Tue, 13 Jan 2015 21:12:44 +0100
Hi Jim
It'll work fine, my 64 gb card finds all 15000 tracks.
Regards
Adrien
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Jim McAuslan
Sent: Sunday, January 11, 2015 1:06 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: 64 Gigabyte Transcend SD Caards
Hello Pele,
When I get to that stage I'll let you know. Now copied
about 30gb to
the card so far.
Jim Mc
On 11/01/2015 10:56, Pele West wrote:
> Hi Everyone
>
> There has recently been discussion on here about 64 GB
Transcend SD
> Cards working in the Victor Reader Stream.
>
> Before I buy one, I am interested to know if anyone has
completely
> filled it up with music and, if so, will the
> Stream access all the files? I am asking this because the
Plextalk
> Pocket can read a 32 GB SD card but gives up when it gets
to the 160th
> folder as it has filled up its Table of Contents. (At
least, that is
> what mine does).
>
> I use 32 Gb cards on my old and new Stream with no
problems.
>
> Pele West
>
> ** To leave the list, click on the immediately-following
link:-
> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
--
Jim McAuslan from sunny Findhorn
Minds are like parachutes
They work best when open
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
