Hi Davide
FYI, I got the DMA board and it works OK in the JS128.
The only issue is mechanical: the Spectrum+ case doesn't completely close with
the board fitted.It is necessary to remove 2 screws from tbe keyboard backplate
and replace the case screws with new ones 15mm long.4mm plastic screw spacers
are also required for the screws so the case closes more or less ok.It is also
required to supplement 3-4 mm the place in the cover where the feet springs
touch.
At the end the the result is acceptable from the mechanical point of view.
Regards.
Enviado desde mi smartphone Samsung Galaxy.
-------- Mensaje original --------De: Davide Barlotti
<davide.barlotti@xxxxxxxxxx> Fecha: 8/2/17 3:01 (GMT+01:00) Para:
zxspectrum@xxxxxxxxxxxxx Asunto: [zxspectrum] Re: Z80 DMA
Hi Mariano,
exactly I bought the DMA board on SellMyRetro from Zaxon/Piotr.
I didn't try, I have one JS128K but not here to test in short time.
Anyway I think you can enquire Piotr on Q&A section
http://www.sellmyretro.com/offer/details/zx-spectrum-128-dma-interface-datagear-20118
He produce both boards and should be in condition to verify.
Davide
Da: zxspectrum-bounce@xxxxxxxxxxxxx <zxspectrum-bounce@xxxxxxxxxxxxx> per conto
di Mariano Ernesto Cividino <mariano.ernesto@xxxxxxxxxxxx>
Inviato: martedì 7 febbraio 2017 22.51
A: zxspectrum@xxxxxxxxxxxxx
Oggetto: [zxspectrum] Re: Z80 DMA
Hi Davide,
Where did you get the DMA board from Piotr? Sell my retro?
Do you know if the Just Speccy 128 would support it?
Thanks.
On 2/7/2017 5:24 PM, Davide Barlotti wrote:
Guardate un po cosa succede a mettere uno Z80 DMA dentro lo Spectrum
https://youtu.be/COVGS0FEBtY
