[zxspectrum] Re: Gigascreen

una traduzione macheronica fatta con un on line translator risulta questo:
Explanatories to the scheme. Signal SEL is a signal of sample of port #EFF7. 
10h D62 necessary to cut off from a payment. Signal INTELOUTSIDE to submit 
there where went 10h D62. Now it is possible ÐÐÐÐÐÑÑÐÐÑÑ demos which 
blinked screens and to take pleasure effect to the full. TO> such question and 
how this all to the Pro to fasten? I explain: 
1) 10h D62 It is an output with port #7FFD a signal of inclusion ÃÃÂpÂÃÂ 
ÃÂpÃÂÃ (on Profi it refers to POLE_SCR). 
2) 3h D14 It frequency. 
3) 10h D51 an impulse. 
4) if at you port #EFF7 not that signal SEL is necessary to you 
ÃÃÂpÂÂpÂÃÃÃÃ. HÃÃÃÂÃÃ, know as ÃÃÃpÃÃà ÂÂpà *EFF7. The 
comment from me: TM2 obviously superfluous. It is necessary only if at ÃÃ9 
free ÐÐÑÐÐ does not remain. And here so it is made at me, on a green 
Scorpion. The port *EFF7 is collected on ÃÃ9. By the way, I do not remember 
that there have subtilized with decoding, but it has turned out on the case 
less, than in the known scheme, and any ÐÐÐÐÑÐÐÐ it is not necessary. 
bit 4 - GIGASCREEN. Hardware interlace. As is known, Spectrum has two screens, 
and in each of them till 192 lines. The cycle of work ÐÐÑÐÑÐÐÐÑÐ 
borrows two staff. In the first on the screen even lines are deduced from the 
zero screen and odd of the first, in the second - odd of zero and even of the 
first. The effect is similar to when each interruption switch the screen, but 
without obviously expressed blinking. ÐÑÑÐ, this of bats colors or points 
on the screen are possible ÑÐÐÑÑ together with 0-th or 1-st, interlace to 
a side how many.

Other related posts: