Thanks Ben, Might I suggest that if possible as standard on your phones a more frequent interval (maybe once every 10 seconds?) in sleep mode might be more useful as the likelyhood of spotting that 1 brief flash every 1 minute is very small! Power saving wise I can’t imagine that a brief flash of the LED is going to make much difference. have a good night Regards Rob From: ztebladeopensource-bounce@xxxxxxxxxxxxx [mailto:ztebladeopensource-bounce@xxxxxxxxxxxxx] On Behalf Of ying.ben@xxxxxxxxxx Sent: 18 November 2010 14:23 To: ztebladeopensource@xxxxxxxxxxxxx Cc: ztebladeopensource@xxxxxxxxxxxxx; ztebladeopensource-bounce@xxxxxxxxxxxxx; xiebin@xxxxxxxxxx Subject: [ztebladeopensource] 答复: [ztebladeopensource] LED notification further info Dear rob, Thanks for your mail. I used another model ZTE android smartphohe named P722G to reappear your issues, then i find that our P722G would flash his LED every 1 minutes in the sleeping mode. In the waking up mode, the LED would flash its LED every 3 seconds. I have found Blade in my table but when i used it to reappear your issues i found that it was an Chinese version Blade, there was no LED in the front of the handset. So I found that i have no idea on your problem this night. I will try to find an England version Blade to reproduce your matter tomorrow. Best regards. Ben Ying Smartphone System Department ZTE Corporation - "Morgan, Rob" <Rob.Morgan@xxxxxxxxxxxxxxx> 发件人: ztebladeopensource-bounce@xxxxxxxxxxxxx 2010-11-18 21:05 请答复 给 ztebladeopensource@xxxxxxxxxxxxx 收件人 <ztebladeopensource@xxxxxxxxxxxxx> 抄送 主题 [ztebladeopensource] LED notification further info I’ve investigated this a little more and wonder if you can say whether or not the V880 suffers from the same issue? When I get a text message or missed call, the LED back button flashes once every 30 (I think) seconds to notify the user of the event. Once the phone goes to sleep (screen goes off) the flashing stops so the user has no way of identifying that there was a missed call. This does seem like a pretty serious flaw and it’s confusing a lot of people, I get around it by installing the flashnotify app from the market but it really shouldn’t be necessary. Can you confirm if this is the same in 2.2 for the V880 at the moment, and whether it’s a hardware or software issue? What really should happen is that the LED continues to flash when the phone sleeps, if there is a hardware issue in that the LED will not work when the phone is in a full sleep then maybe only a “soft” sleep should occur when there is a notification? Regards Rob -------------------------------------------------------- ZTE Information Security Notice: The information contained in this mail is solely property of the sender's organization. This mail communication is confidential. Recipients named above are obligated to maintain secrecy and are not permitted to disclose the contents of this communication to others. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the originator of the message. Any views expressed in this message are those of the individual sender. This message has been scanned for viruses and Spam by ZTE Anti-Spam system.