Fastboot without USB is a bit pointless, I don't know why they would both including it in the bootloader, but if you can't see anything in lsusb it is certainly broken. On 23 October 2011 11:04, Sebastian Robinson <sebastian.robinson@xxxxxxxxxx>wrote: > I'll grab a config tomorrow, if I try and build it against the SKATE kernel > source there is seems more than happy until it gets to the board file, so I > cant imagine its going to be too different... > > but then it is the usual story with ZTE now, we could 'fix' it but I'd > rather have the official source from them since its part of the licence > terms.... > > > Im fairly sure that fastboot has no USB, I've not had this problem with any > of the other devices I've tried it with, from my linux box doing an lsusb > just shows no USB devices, I've tried it on a windows PC and OSX just to be > sure. > > I also tried using USBTrace on my windows box and its not seeing any sort > of activity on the USB port when its in fastboot mode, I can get the thing > into FTM and it's connectable via QPST so im fairly sure there is something > up with fastboot mode..... > > unless you have any other ideas I could try > > > > > > On 23 Oct 2011, at 00:50, Tom Giordano wrote: > > The board files should be fairly easy to add (assuming the 2.6.32 source is > correct). Can you pull a config from your device so I can test it compiles > before I upload source (I can't find a Turies rom). > > USB should work in fastboot, maybe you have a permissions problem (if using > linux run it as root). USB is deliberately disabled in recovery by ZTE's > FTM_MODE config switch. > > On 23 October 2011 04:24, Sebastian Robinson < > sebastian.robinson@xxxxxxxxxx> wrote: > >> Hi Guys, >> >> I'm not sure if anyone is still subscribed here, or if ZTE follow this, >> but I just wanted to flag up that the ZTE Turies is now available to buy in >> the UK, but there is no sign of the source code on ZTE's support site.... >> It comes with a 2.6.35 kernel, so I checked the Skate and Roamer source but >> was unable to build a kernel using that since the board files are missing. >> >> I also noticed that when I reboot the device into recovery or fastboot >> mode there is no USB, is this on purpose? >> >> Cheers, >> Sebastian >> > > >