Re: death to word

  • From: Frank Brownlow <fbrownlo@xxxxxxxxxxx>
  • To: xywrite@xxxxxxxxxxxxx
  • Date: Fri, 20 Apr 2012 22:59:42 -0400

I don't set myself up as an expert on all this, but when a publisher told me--to give an example--to set my type at 11Pt vertically, 12Pt horizontally, I was able to do this with Xy4, but I can no longer do it with NB. I've talked to NB about this, & they agree--the command is still there, but it no longer works.


I know perfectly well what NB allows me to do by way of a command such as Sz12.5PT. I also know equally well that it doesn't allow me--any longer--to issue the command SZ11Pt,12Pt and expect results. So what I can't do is prepare a camera-ready MS according to my publisher's former specification--consequently all my previously formatted texts no longer work in NB. This isn't a disaster, but it's irritating, and so, as I originally said, I regret the loss of this old Xy4 capability.

I thought the pitch was the height--if it's not, then it's not--but whatever pitch means, Xywrite allowed one--working in Postscript--to adjust both the height and the width of type, hence allowing for some pretty nifty typesetting.

Frank Brownlow



\On 4/19/2012 1:32 PM, Paul Ambos wrote:
That is the confusion:  "pitch" is a horizontal -- not vertical --
measurement of fonts, usually expressed in characters per inch.  Some
typesetting programs (but not XyWrite) can adjust the pitch (as opposed to
character width) by inserting microspacing between the letters.  Vertical
size specification is typically in points (a point is 1/72.27 inch, although
Adobe uses 1/72" exactly).

And your claim is not correct as regards Nota Bene 10 beta, at least, which
accepts a SZ command for, e.g., SZ12.5PT as well as through the ctrl-t
dialogue box.  The latter lists whole numbers to choose from, but you can
type in any number in the space above the list.

Regards,

Paul Ambos
pambos@xxxxxxxxxxxx




-----Original Message-----
From: xywrite-bounce@xxxxxxxxxxxxx [mailto:xywrite-bounce@xxxxxxxxxxxxx] On
Behalf Of Frank Brownlow
Sent: Wednesday, April 18, 2012 6:41 PM
To: xywrite@xxxxxxxxxxxxx
Subject: Re: death to word

It's a way of setting both the height and the width of the type.  You
need a laser printer capable of Postscript printing. The argument of the
command sets pitch first, the width second, e.g., SZ 11PT,12Pt.  This
form of the command works in XY4&  Signature, but not in NB. where one's
only option is the single number, e.g., SZ 12PT.

Frank.

On 4/17/2012 6:04 PM, Paul Ambos wrote:
What is the difference between pitch and width and how would one adjust
those aspects in XyWrite?

Regards,

Paul Ambos
pambos@xxxxxxxxxxxx

<snip>






Other related posts: