[visionegg] Re: sound and visionegg (e.g. portaudio): demo codeavailable?
- From: Christoph Lehmann <lehmann@xxxxxxxxxxxx>
- To: visionegg@xxxxxxxxxxxxx
- Date: Tue, 13 Jan 2004 13:12:11 +0100
sorry, this was for Christophe Pallier
...
Cheers
Christoph
On Tue, 2004-01-13 at 13:04, Christoph Lehmann wrote:
> many thanks, Christophe, for the C program
>
> I start with auditory fMRI experiments and your code might be an
> excellent starting point, especially with the possibility to wait for a
> TTL signal on the LPT.... fMRI-ready!!
>
> am I right in the assumption, that your code is (more or less)
> platform-independent, since you are using SDL?
> what IDE do you use for programming?
>
> did you already try the 2.6 kernel?
>
> cheers
>
> christoph
> On Mon, 2003-12-15 at 09:27, Christophe Pallier wrote:
> > Christoph Lehmann wrote:
> >
> > >Christophe, I was just playing around with your python code for sound
> > >presentation:
> > >one question: what does the
> > >
> > >
> > >
> > >> while time.get_ticks()-start > n*SOA:
> > >> time.delay(10)
> > >>
> > >>
> > >
> > >..I can comment it out, and nothing happens. It is a delay of 10ms, yes,
> > >just if the onset of the n-th stimulus is later than it "should"
> > >(assuming that on each SOA=2000s the next stimulus shall be played)
> > >
> > >
> >
> >
> > Ooops, sorry, this should be
> >
> > while time.get_ticks()-start < n*SOA:
> > time.delay(10)
> >
> >
> > which will wait by steps of 10 msec until the time is reached for playing
> > the file.
> > As I said the timing with this is not precise!
> >
> > I attach playlist.tar.gz, a small C program using SDL and SDL_mixer that
> > does about the same
> > but with better control of the timing. Please tell me if you have any
> > problem with it.
> >
> >
> > Christophe
--
Christoph Lehmann <lehmann@xxxxxxxxxxxx>
University Hospital of Clinical Psychiatry
======================================
The Vision Egg mailing list
Archives: http://www.freelists.org/archives/visionegg
Website: http://www.visionegg.org/mailinglist.html
- References:
- [visionegg] Re: sound and visionegg (e.g. portaudio): demo codeavailable?
- From: Christoph Lehmann
Other related posts:
- » [visionegg] Re: sound and visionegg (e.g. portaudio): demo codeavailable?
- » [visionegg] Re: sound and visionegg (e.g. portaudio): demo codeavailable?
- » [visionegg] Re: sound and visionegg (e.g. portaudio): demo codeavailable?
- » [visionegg] Re: sound and visionegg (e.g. portaudio): demo codeavailable?
- » [visionegg] Re: sound and visionegg (e.g. portaudio): demo codeavailable?
- [visionegg] Re: sound and visionegg (e.g. portaudio): demo codeavailable?
- From: Christoph Lehmann