[visionegg] Re: Help

would something like this help?
http://www.aver.com/ppd/averkeyimicro.html
(unless you're already using one)

On Apr 3, 2007, at 1:55 PM, Tony Arkles wrote:
That's probably an issue with the video drivers. I ran into similar problems, and didn't ever get them resolved. 

On 3-Apr-07, at 9:45 AM, Nabil Daddaoua wrote:


hi Guys,
I have a small problem, when I clone the output of the computer to a small tv (50hz frame rate) the visionegg ignore the frame rate of the primary screen (60 hz) and draws the frames using the frame rate of the tv (50hz) How I can set the frame rate to the primary screen even if the out put is cloned to another device with smaller frame rate? 

Thanks

Nabil



======================================
The Vision Egg mailing list
Archives: http://www.freelists.org/archives/visionegg
Website: http://www.visionegg.org/mailinglist.html
The information contained in this message may be privileged and confidential. If you are NOT the intended recipient, please notify the sender immediately with a copy to hipaa.security@xxxxxxxx and destroy this message.
Please be aware that email communication can be intercepted in transmission or misdirected. Your use of email to communicate protected health information to us indicates that you acknowledge and accept the possible risks associated with such communication. Please consider communicating any sensitive information by telephone, fax or mail. If you do not wish to have your information sent by email, please contact the sender immediately.

Other related posts: