[torontocbm] Re: Raspberry Pi Computer

  • From: ennio <ennioac@xxxxxxxx>
  • To: torontocbm@xxxxxxxxxxxxx
  • Date: Fri, 2 Mar 2012 07:34:51 -0800 (PST)

Okee dokee, will shoot off an email tonight. :)
E


--- On Fri, 3/2/12, Leif Bloomquist <leif@xxxxxxxxxxxxxxxx> wrote:

From: Leif Bloomquist <leif@xxxxxxxxxxxxxxxx>
Subject: [torontocbm] Re: Raspberry Pi Computer
To: torontocbm@xxxxxxxxxxxxx
Date: Friday, March 2, 2012, 9:32 AM


Go for it!   More guest speakers for the TPUG meetings, the better (less work 
for me ;-)


Plenty of parallels with the C64 as have been discussed.  With a video out port 
you could even connect one to a 1702.   People on Lemon are already talking 
about running VICE on it, then using a Keyrah etc. to embed it into a C64 case.


I think it would be a riot to install Commodore USA's "Vision OS" Linux 
on one (would need porting to ARM, mind you) and hook it up to a 1702.  :-P


-Leif




On Fri, Mar 2, 2012 at 8:29 AM, Ennio Cellucci <ennioac@xxxxxxxx> wrote:

If no one minds, I can send an email and ask. 


On 2012-03-01, at 2:19 PM, "J Bourdeau" <jeffobourdeau@xxxxxxxxx> wrote:








..Mr. Tyler might enjoy being a TPUG member and/or doing 
some meeting and/or WOC demos....?
 
 

From: ennio 
Sent: Thursday, March 01, 2012 1:24 PM
To: torontocbm@xxxxxxxxxxxxx 
Subject: [torontocbm] Re: Raspberry Pi Computer
 


  
  
    I was at the Seneca College open source conference in the 
      fall and saw it there. I'm going to go for it as well in a few months. 
      Definitely a neat little board. Surprisingly the folks from Broadcom were 
      involved in it!  

I *THINK* these are the guys working on the 
      OS: 
      
http://zenit.senecac.on.ca/wiki/index.php/Fedora_ARM_Secondary_Architecture

E


--- 
      On Thu, 3/1/12, J Bourdeau <jeffobourdeau@xxxxxxxxx> 
      wrote:

      
From: 
        J Bourdeau <jeffobourdeau@xxxxxxxxx>
Subject: [torontocbm] Re: 
        Raspberry Pi Computer
To: torontocbm@xxxxxxxxxxxxx
Date: Thursday, 
        March 1, 2012, 1:01 PM


        .."inspiring “a whole new Commodore 64 
        generation.”"..."there are going to be people who use them for 
        programming, as a gaming machine, as a media planner, as a utility 
        machine.”"..."but is designed to be plugged into a TV."..."And people 
        already have a high value expensive piece of electronic equipment, a 
        television, in their homes they can use for display.”"..."The Model A, 
        which has also been reworked to include 256 megabytes of RAM, “will go 
        into production immediately.”"

It's Deja-Vu!! 
        LOL...

..'might be worth holding off too until they setup the 
        upgrades they mentioned...

-----Original Message----- From: Leif 
        Bloomquist
Sent: Thursday, March 01, 2012 11:00 AM
To: wlmailhtml:/mc/compose?to=torontocbm@xxxxxxxxxxxxx
Subject: 
        [torontocbm] Raspberry Pi Computer

I was about to email the group 
        with a link to the new Raspberry Pi
single-board computer.

At 
        a mere $35 with plenty of power, it's ideal for hobbyists, and 
        the
parallels with the Commodore 64 are obvious.   However, 
        someone at the
Toronto Star has made the same observation:

http://www.thestar.com/business/article/1138709--35-computer-with-toronto-designed-software-sells-out-worldwide-in-minutes?bn=1


Pretty 
        cool, didn't know the OS was developed here in Toronto at Seneca 
        College.

Here are the project links.  Any 
        thoughts?   I'll probably buy one
once the furor dies 
        down.

http://www.raspberrypi.org/
http://en.wikipedia.org/wiki/Raspberry_Pi


Cheers
-Leif

-- 
        Leif Bloomquist
wlmailhtml:/mc/compose?to=leif@xxxxxxxxxxxxxxxx
http://www.schemafactor.com

“What's in the way 
        is the way.” - Lao 
Tzu




 



-- 
Leif Bloomquist
leif@xxxxxxxxxxxxxxxx
http://www.schemafactor.com


“What's in the way is the way.” - Lao Tzu

Other related posts: