[THIN] Re: oki printer c5600 vs c5900

in my past experience with Oki, i found that PS support was not always
included but PCL usually is.  You can also run them as an HP.  Try popping a
HP Color LaserJet 4500 driver on the 5600 and see if your printing
improves.  I always had real good results from Oki.  They were cheap, tough,
and dependable.

On 3/29/07, David <dmauri@xxxxxxxxx> wrote:


Hi all,

be noticed of my own fault....
We have bought a Oki printer (laser & color) model c5600 time ago.
And now we have notice that a simple job such as pdf file about 1mb,
take aprox. 90mb to create the spool.
I called to techcnical service and they said that is 'normal'..because
is Winprint not PS/PCL.....

So, now we are going to buy new one, OKI C5900N.
Anyboy has this one? to avoid the same problem, despite of  I know is
PCL supported.

Thanks a lot.
SBC SITES ONLY GOOGLE SEARCH: http://www.F1U.com
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************

Other related posts: