[THIN] Re: how to check WI version
- From: "Pavlo Ignatusha" <Pavlo.Ignatusha@xxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Mon, 30 Oct 2006 15:55:54 -0500
Michel,
That's helpful but again, if you see both 4.0 and 4.2 installed in the
Add/remove programs how can you be 100% sure 4.2 is used? Especially if
the build on the logon page indicates 45083 that seems to indicate it is
a 4.0 ...
Thanks,
Pavlo Ignatusha
Systems Network Coordinator
Pembroke Regional Hospital
tel. +1 (613) 732-3675
fax. +1 (613) 732-9986
________________________________
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Michel Bos
Sent: Monday, October 30, 2006 3:34 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: how to check WI version
Don't you get this information?
________________________________
Van: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] Namens
Pavlo Ignatusha
Verzonden: maandag 30 oktober 2006 21:24
Aan: thin@xxxxxxxxxxxxx
Onderwerp: [THIN] Re: how to check WI version
Yes , add/remove programs show both 4.
I think I just was confused not to see it in the build information or in
the console.
Thanks,
Pavlo Ignatusha
Systems Network Coordinator
Pembroke Regional Hospital
tel. +1 (613) 732-3675
fax. +1 (613) 732-9986
________________________________
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Michel Bos
Sent: Monday, October 30, 2006 3:00 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: how to check WI version
Check it in Add/Remove software on the webserver where it is installed
?!
Grtz,
Michel
________________________________
Van: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] Namens
Pavlo Ignatusha
Verzonden: maandag 30 oktober 2006 20:51
Aan: thin@xxxxxxxxxxxxx
Onderwerp: [THIN] how to check WI version
Hello group,
A really quick question:
How can I confirm the version of WI that we run?
If I open source of the WI logon page in the Notepad it has build 45083
in it. If I check the c:\Program Files\Citrix\Web Interface folder on
the WI server it contains both 4.0 and 4.2 subfolders. Presentation
Server Console doesn't have that info either. Can someone point me in
the right direction?
Thanks,
Pavlo Ignatusha
Systems Network Coordinator
Pembroke Regional Hospital
tel. +1 (613) 732-3675
fax. +1 (613) 732-9986
The information in this email belongs to the Pembroke Regional Hospital
and may contain confidential and privileged information for the sole use
of the individual or organization to which it is addressed. If you are
not the intended recipient, you are hereby notified that any disclosure,
copying or distribution of the contents of this email is prohibited.
If you have received this email in error, please contact the sender and
destroy all copies of the original message.
Other related posts:
- » [THIN] how to check WI version
- » [THIN] Re: how to check WI version
- » [THIN] Re: how to check WI version
- » [THIN] Re: how to check WI version
- » [THIN] Re: how to check WI version
