[THIN] Re: cloneing mfpsv3

Had the same problem ourselves just last week (using altiris RDP).  A
new image fixed it, but I believe that's only because it had a fresh lhc
(as recreating the lhc after a build also fixed the problem).  We now do
a recreatelhc after the image has been applied before restarting the IMA
service.  Not saying this is the solution though, still looking into the
specifics...

 

________________________________

From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Stratton, Doug MSER:EX
Sent: 15 March 2005 20:30
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] cloneing mfpsv3

 

What we are doing:
We are setting up servers using sysprep.  We set it all up, install mf,
do the clean up as per citrix cloning docs (does not include removing
from farm in anyway).  Then sysprep it.

 

Problem is:
The box we initially sysprep from does not go back into the farm
correclty ever again.  We image it and try to add to farm and it does
not work.  We have to do dsmaint recreatelhc to get it to go in.

 

I noticed that before adding it back the server is gone from the farm
except that it still shows up under zone information?

 

 

 

_______________________________________________
Doug Stratton  

CITS

Technology Development Analyst

Work: 250-356-6678

doug.m.stratton@xxxxxxxxx
_______________________________________________

 

 


**************************************************************************** 



SMOKE ALARMS SAVE LIVES



Go to London Fire at www.london-fire.gov.uk/firesafety 



This email is confidential to the addressee only. If you do not believe that
you are the intended addressee, do not use, pass on or copy it in any way.
If you have received it in error, please delete it immediately and telephone
the supplied number, reversing the charges if necessary.

Other related posts: