Actually I tried that a while back to see what would happen if you loaded Metaframe on a server that was running in remote admin mode. Worked fine in my lab, but I wouldn't recommend it for the real world. -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Joe Shonk Sent: Wednesday, July 17, 2002 7:27 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: client Ugh, you can't connect to a server via ICA if your server is in Remote Admin mode. Try an RDP client. Joe -----Original Message----- From: Mark Mucher [mailto:mm@xxxxxx] Sent: Wednesday, July 17, 2002 4:22 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: client I'm in remote admin mode - no license server required... Rob Beekmans wrote: >checked the license server? > > >----- Original Message ----- >From: "M" <mathras@xxxxxxxxxxxxxxxx> >To: <thin@xxxxxxxxxxxxx> >Sent: Wednesday, July 17, 2002 11:44 PM >Subject: [THIN] Re: client > > > > >>If the ping / name resolution works , have you tried trying to Telnet to >> >> >the > > >>server on port 1494 ? >> >>You should see "ICA" appear. >> >>regards >> >> >>----- Original Message ----- >>From: "Mark Mucher" <mm@xxxxxx> >>To: <thin@xxxxxxxxxxxxx> >>Sent: Wednesday, July 17, 2002 10:30 PM >>Subject: [THIN] Re: client >> >> >> >> >>>Black screen - no logon? >>> >>>Me too! >>> >>>(Works locally over IP, not via internet) >>> >>>Mark >>> >>> >>>-----Original Message----- >>>From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On >>>Behalf Of Randy Wood >>>Sent: Wednesday, July 17, 2002 5:25 PM >>>To: thin@xxxxxxxxxxxxx >>>Subject: [THIN] client >>> >>> >>>I have a 98 machine and have tried both the latest and an older client >>> >>> >to > > >>>connect via dial up. Neither will work. I can ping to the address, and >>> >>> >>name >> >> >>>once connected to our network, but the client only states that there are >>>network problems preventing connectivity, any suggestions? Thanks in >>>advance. >>> >>>David R. Wood (Randy) >>>LAN Administrator ,The Blood Center >>>1400 La Concha Lane Houston, Texas >>>77054 >>>713.791.6337 >>> >>> >>> >>> >>> >>>=================================== >>>This weeks Sponsor: >>>triCerat, Inc >>>ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control >>>Learn more at: >>>http://www.tricerat.com/?page=products <http://www.tricerat.com/?page=products&product=sdfxp> &product=sdfxp >>> >>>=================================== >>>For Archives, to Unsubscribe, Subscribe or >>>set Digest or Vacation mode use the below link. >>> >>>http://thethin.net/citrixlist.cfm >>> >>> >>> >> >> >> >>=================================== >>This weeks Sponsor: >>triCerat, Inc >>ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control >>Learn more at: >>http://www.tricerat.com/?page=products <http://www.tricerat.com/?page=products&product=sdfxp> &product=sdfxp >> >>=================================== >>For Archives, to Unsubscribe, Subscribe or >>set Digest or Vacation mode use the below link. >> >>http://thethin.net/citrixlist.cfm >> >> >> > > > > > >=================================== >This weeks Sponsor: >triCerat, Inc >ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control >Learn more at: >http://www.tricerat.com/?page=products <http://www.tricerat.com/?page=products&product=sdfxp> &product=sdfxp > >=================================== >For Archives, to Unsubscribe, Subscribe or >set Digest or Vacation mode use the below link. > >http://thethin.net/citrixlist.cfm > > > =================================== This weeks Sponsor: triCerat, Inc ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control Learn more at: http://www.tricerat.com/?page=products <http://www.tricerat.com/?page=products&product=sdfxp> &product=sdfxp =================================== For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm