[THIN] Re: Upgrading MetaFrame XP to FR3

Not recommended. What reason do you have for not updating it? There isn't much 
to it. 
Also you can probably just load FR3 SP4 and get all those fixes.
JK
 

Minero Hector B DLVA <MineroHB@xxxxxxxxxxxxx> wrote:
Thanks for the info.
I have MDAC 2.5 SP3, do you think that's good enough?

Hecotr.

-----Original Message-----
From: Henry Sieff [mailto:hsieff@xxxxxxxxxxxx]
Sent: Friday, January 28, 2005 11:12 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: Upgrading MetaFrame XP to FR3


Yes, if you are using indirect, DS server must be upgraded first, because
fields need to be added, etc. etc.

Version of MDAC? 2.71.9030.9 is working, but I think 2.6 will work.

Go ahead and apply the following Citrix Hotfixes along with your regular
deployment - XE103W2K082, XE103W2K100, XE103W2K120 (may have been superceded
by newer ones, but these are all significant and contain multiple fixes) I
am assuming Win2k.

We tested the upgrade pretty extensively, having been reamed by FR2, and had
no problems at all.

Henry

> -----Original Message-----
> From: thin-bounce@xxxxxxxxxxxxx 
> [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Minero Hector B DLVA
> Sent: Friday, January 28, 2005 6:34 AM
> To: Thin (E-mail)
> Subject: [THIN] Upgrading MetaFrame XP to FR3
> 
> Hello,
> I plan to upgrade the MetaFrame server holding the Data Store 
> (MS-Access) from FR2 to FR3.
> I've read this server needs to be upgraded first.
> Should I expect any problems with the upgrade?
> What version of MDAC is required?
> 
> I tried upgrading another server (not the DS) and I had lots 
> of errors. I am assuming it was because I needed to upgrade 
> the DS server first.
> 
> Thanks,
> ________________________________
> Hector Minero
> NSWCDD Code K55
> Ph: (540) 653-8859
> Fax: (540) 653-8575
>

Other related posts: