[THIN] Re: Tray Selection

  • From: "Jason Patten" <JasonP@xxxxxxxx>
  • To: <thin@xxxxxxxxxxxxx>
  • Date: Fri, 15 Apr 2005 09:42:22 -0400

How did you force it to Tray 1?  Even with both the Printer on the server and 
the client printer Settings Set to Tray 1 it would not print to the tray.  Is 
there a setting I am missing?  I have looked at this and been unable to figure 
it out.  Was it the NT forms section?
Jason
 
 
 

Thank you,
M3 Tech support
Technical Support: HYPERLINK 
"http://www.innquire.com/TechnicalSupport/HD"http://www.innquire.com/TechnicalSupport/HD
 

 

   _____  

From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of 
Eddy, Tim S.
Sent: Friday, April 15, 2005 8:52 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Tray Selection


We had similar issues with our warehouses. They come in through NFuse and print 
to HP4200's. They needed to print on legal size paper and wanted the printer to 
default to tray 2. But that would be a waste of legal size paper. So, we 
created two printers and pointed them to the IP for the printer. One print 
queue pointed to tray 1 and the other queue pointed to tray 2. They just have 
to pick the printer they want to print to. We used the latest HP PCL5e driver 
for the printers. 


   _____  

From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of 
Jason Patten
Sent: Friday, April 15, 2005 8:41 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Tray Selection



Ok, now I have another one that has me at least stumped. I have a customer that 
is using an HP LaserJet 4250n for Check printing on pre-printed checks.  They 
do not want to have to reverse the order the checks were in to feed them 
through tray 2 (which is the default tray).  The printer is a local printer on 
the clients network and they connect over the internet to our metaframe server 
(nt4tse).  No matter what we have tried as far as local or server printer 
settings we cannot get the printer to print from a different tray, they want to 
use the Manual feed on tray 1.  Any tips on how to get tray selection to work?  
We are using the PCL5e version of the print drivers.

Jason 



Jason Patten 
Technical Support 
M3 Accounting 
800B Jesse Jewell Pkwy 
Gainesville, GA 30506 
770-297-1925 ext:266 
770-297-8466 Fax 
techsupport@xxxxxxxx 

Technical Support: HYPERLINK http://www.innquire.com/TechnicalSupport/HD 
HYPERLINK 
"http://www.innquire.com/TechnicalSupport/HD"http://www.innquire.com/TechnicalSupport/HD
 

DISCLAIMER: This Electronic Message contains information from M3 Accounting 
which may be privileged. The information is intended to be for the use of the 
addressee only. If you are not the addressee, or the employee or agent 
responsible to deliver it to the intended recipient, note that any disclosure, 
copy distribution or use of the contents of this message is prohibited. If you 
have received this Electronic Message in error, please promptly notify the 
sender by return e-mail. For information regarding our company, please visit 
our Web site at HYPERLINK http://www.m3as.com HYPERLINK 
"http://www.m3as.com"http://www.m3as.com.




--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.11 - Release Date: 4/14/2005
  


--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.11 - Release Date: 4/14/2005



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.11 - Release Date: 4/14/2005
 

Other related posts: