[THIN] Re: TERMINALS
- From: Matt McKeehan <matt.mckeehan@xxxxxxxxxxxxxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Mon, 3 Feb 2003 13:57:46 -0500
Why won't you use remote admin or rapport to manage your WYSE thin Client,
it would be much less of a headace than flashing via a laptop. We had this
problem and we upgraded firmware and it went away....
Matt Mckeehan
Citrix LAN Supervisor
Admin Office of The PA Courts
PA Supreme Court
(717)795-2063
(717)514-9446 mobile
-----Original Message-----
From: Tim Mangan [mailto:tmangan@xxxxxxxxxxxx]
Sent: Monday, February 03, 2003 10:01 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: TERMINALS
That certainly sounds like a different problem than power.
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On
Behalf Of Greg Reese
Sent: Monday, February 03, 2003 9:54 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: TERMINALS
it is the same behavior at all four locations I support. Those = locations
are spread around the state. I even had one at my house for a = while that
did it. We've thought about power problems but we are in = health care and
none of the other electronics have any trouble. None of = the other brands
of terminals have ever had trouble either. Just the = Wyse terminals.
Generally it starts out with a user typing along working during the day =
and the unit just blinks off. The next day or two it does it again, = then
it starts happening twice a day, then every couple hours. It gets = worse
and worse until they finally call up here in a rage of frustration =
demanding new systems. This is all over the course of a month or a few =
weeks. We keep spares at each location for just such an issue and then =
their bad unit makes its way here. We use a laplink cable to force a =
re-flash of the ROM image and then the unit is fine. Re-flashing with = the
software tools will sometimes do the trick but usually not. Doing =
it via a cable directly always works. Sometimes we never get a unit =
back after that, sometimes we see it a month later for the same thing.
Greg
-----Original Message-----
From: Tim Mangan [mailto:tmangan@xxxxxxxxxxxx]
Sent: Monday, February 03, 2003 9:36 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: TERMINALS
Have you ever looked into the building power? I was at a company one = time
that had a bad transformer on a pole out back. Computer monitors kept =
going bad all the time until we figured out the power wasn't clean. Once
the transformer was replaced, problems went away - although slowly because
damage had been done.
tim
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On
Behalf Of Greg Reese
Sent: Monday, February 03, 2003 8:30 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: TERMINALS
it's the strangest thing with Wyse. Either people have nothing but =3D
problems with them (like me) or they never have problems with them. It's =
=3D all or nothing. Out of 120 units, I still have at least 2 a week turn =
=3D up dead.
Greg
-----Original Message-----
From: Matt McKeehan [mailto:matt.mckeehan@xxxxxxxxxxxxxxxxxx]
Sent: Monday, February 03, 2003 6:48 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: TERMINALS
We have about 2700 wyse 3320's in the field. They work fine. We are
currenting evaluating the 3125's. They run just fine. Now Rapport is a
whole other issue........
Matt Mckeehan
Citrix LAN Supervisor
Admin Office of The PA Courts
PA Supreme Court
(717)795-2063
(717)514-9446 mobile
-----Original Message-----
From: Stage, Paul [mailto:p.stage@xxxxxxx]=3D20
Sent: Wednesday, January 29, 2003 3:36 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: TERMINALS
We are using Wyse WT3360SE terminals and have not had any major issues = =3D
with them. When we first implemented them they were frequently getting =3D
cleared. Apparently if you hold the g key down while powering them on it
clears = =3D the config. Working like a charm now. :)
Thanks,
Paul T. Stage MCP, A+
Information Services
La Porte Hospital
Tel. (219) 326-1234 x7126
or (800) 235-6205
Fax (219) 325-6416
-----Original Message-----
From: Jim Kenzig [mailto:jimkenz@xxxxxxxxxxxxxx]=3D20
Sent: Wednesday, January 29, 2003 2:02 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: TERMINALS
Links for all the different manufacturers are half way down the page at
http://thethin.net/links.cfm
You might want to look at the ChipPc OpTC if all you need is ICA
http://www.chippc.com/
Regards,
Jim Kenzig
http://thethin.net
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On
Behalf Of Scott Musser
Sent: Wednesday, January 29, 2003 2:35 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] TERMINALS
Does anyone have any experience with Terminals other than Wyse? We've = =3D
had a high rate of failure of the Wyse units (various models in the 3000 =3D
series). I just ordered a 3125 to evaluate, but I'm more interested in
trying =3D another manufacturer. We strictly use ICA, so we don't need alot
of other emulations or built-in browsers etc. Any recommendations would be
appreciated.
--
N. Scott Musser
MCP, MCSA, MCSE
Network Administrator
IDenticard Systems, Inc.
scottm@xxxxxxxxxxxxxx
*************************************************************************=
=3D
**
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your =3D
server capacity--cost-effectively. Now you can dramatically increase the
number = =3D of users on a server by as much as 40%--and reduce the number
of servers = =3D you have to manage. By optimizing memory usage, Wyse
Expedian software =3D allows the terminal server to support more
applications and more =3D concurrentusers. Download your 30-day free trial
today at:
http://www.wyse.com/expedian/eval.cfm?promo=3D3DUS-Ad-0103TheThinNetNewsl=
et=3D
terEM
*************************************************************************=
=3D
***
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*************************************************************************=
=3D
**
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your =3D
server capacity--cost-effectively. Now you can dramatically increase the
number = =3D of users on a server by as much as 40%--and reduce the number
of servers = =3D you have to manage. By optimizing memory usage, Wyse
Expedian software =3D allows the terminal server to support more
applications and more =3D concurrentusers. Download your 30-day free trial
today at:
http://www.wyse.com/expedian/eval.cfm?promo=3D3DUS-Ad-0103TheThinNetNewsl=
et=3D
terEM
*************************************************************************=
=3D
***
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*************************************************************************=
=3D
**
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your =3D
server capacity--cost-effectively. Now you can dramatically increase the
number = =3D of users on a server by as much as 40%--and reduce the number
of servers = =3D you have to manage. By optimizing memory usage, Wyse
Expedian software =3D allows the terminal server to support more
applications and more =3D concurrentusers. Download your 30-day free trial
today at:
http://www.wyse.com/expedian/eval.cfm?promo=3D3DUS-Ad-0103TheThinNetNewsl=
et=3D
terEM
*************************************************************************=
=3D
***
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*************************************************************************=
=3D
**
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your =3D
server capacity--cost-effectively. Now you can dramatically increase the =
=3D number of users on a server by as much as 40%--and reduce the number of
= =3D servers you have to manage. By optimizing memory usage, Wyse Expedian
= =3D software allows the terminal server to support more applications and
=3D more concurrentusers. Download your 30-day free trial today at:
http://www.wyse.com/expedian/eval.cfm?promo=3D3DUS-Ad-0103TheThinNetNewsl=
et=3D
terEM
*************************************************************************=
=3D
***
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*************************************************************************=
**
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your =
server capacity--cost-effectively. Now you can dramatically increase the
number = of users on a server by as much as 40%--and reduce the number of
servers = you have to manage. By optimizing memory usage, Wyse Expedian
software = allows the terminal server to support more applications and more
= concurrentusers. Download your 30-day free trial today at:
http://www.wyse.com/expedian/eval.cfm?promo=3DUS-Ad-0103TheThinNetNewslet=
terEM
*************************************************************************=
***
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*************************************************************************=
**
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your =
server capacity--cost-effectively. Now you can dramatically increase the =
number of users on a server by as much as 40%--and reduce the number of =
servers you have to manage. By optimizing memory usage, Wyse Expedian =
software allows the terminal server to support more applications and = more
concurrentusers. Download your 30-day free trial today at:
http://www.wyse.com/expedian/eval.cfm?promo=3DUS-Ad-0103TheThinNetNewslet=
terEM
*************************************************************************=
***
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
***************************************************************************
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your server
capacity--cost-effectively. Now you can dramatically increase the number of
users on a server by as much as 40%--and reduce the number of servers you
have to manage. By optimizing memory usage, Wyse Expedian software allows
the terminal server to support more applications and more concurrentusers.
Download your 30-day free trial today at:
http://www.wyse.com/expedian/eval.cfm?promo=US-Ad-0103TheThinNetNewsletterEM
****************************************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
***************************************************************************
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your server
capacity--cost-effectively. Now you can dramatically increase the number of
users on a server by as much as 40%--and reduce the number of servers you
have to manage. By optimizing memory usage, Wyse Expedian software allows
the terminal server to support more applications and more concurrentusers.
Download your 30-day free trial today at:
http://www.wyse.com/expedian/eval.cfm?promo=US-Ad-0103TheThinNetNewsletterEM
****************************************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
***************************************************************************
This Week's Sponsor: New Wyse(R) Expedian(TM)software maximizes your server
capacity--cost-effectively. Now you can dramatically increase the number of
users on a server by as much as 40%--and reduce the number of servers you have
to manage. By optimizing memory usage, Wyse Expedian software allows the
terminal server to support more applications and more concurrentusers. Download
your 30-day free trial today at:
http://www.wyse.com/expedian/eval.cfm?promo=US-Ad-0103TheThinNetNewsletterEM
****************************************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
Other related posts:
