[THIN] Re: Solidworks
- From: "Landin, Mark" <Mark.Landin@xxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 24 Oct 2006 22:41:28 -0500
Coupled with 64-bit platforms so you can get 2GB RAM (or more) for more than 2
users on a server, that could really be something.
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx on behalf of Rick Mack
Sent: Tue 10/24/2006 7:34 PM
To: thin@xxxxxxxxxxxxx
Subject: RE: [THIN] Re: Solidworks
Hi,
From the sounds of the message at iforum, Citrix have developed a new 3-d
acceleration product called pictor that really hurries opengl along. The 3d
performance they demonstrated was quite impressive.
I believe it will be included in PS 4.5 (ohio).
regards,
Rick
Ulrich Mack
Volante Systems
_____
From: thin-bounce@xxxxxxxxxxxxx on behalf of Landin, Mark
Sent: Wed 25/10/2006 2:13
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Solidworks
OK, then the answer is ... your users will hate it. Their screen refreshes will
be abominally slow and their frustration levels skyrocket. (This will be true
of any application relying on hardware graphics acceleration, not just
SolidWorks...)
Right now Citrix doesn't have a good answer for hardware graphics acceleration
on their platform, although I understand that's one area to be addressed in
future version of Presentation Server. Just not yet.
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of
Medeiros, Jim
Sent: Tuesday, October 24, 2006 10:54 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: Solidworks
This is one of my concerns. That's why I'm asking.
Jim Medeiros
Network Manager
RC2 Brands Inc.,
100 Technology Center Drive
Stoughton, MA 02072
jdmedeiros@xxxxxxxxxxx
PH: 781 341 6250
FX: 781 341 6251
_____
From: Landin, Mark [mailto:Mark.Landin@xxxxxxxxxxxxxxxx]
Sent: Tuesday, October 24, 2006 11:51 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Solidworks
How are you going to handle the 3-d graphics issues?
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of
Medeiros, Jim
Sent: Tuesday, October 24, 2006 10:47 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Solidworks
I would like to learn more about using Solidworks on a Citrix Presentation
Server. Does anyone have any information or statistics that they can share
with me regarding this setup?
Thank you!
Jim Medeiros
Network Manager
RC2 Brands Inc.,
#####################################################################################
This e-mail, including all attachments, may be confidential or privileged.
Confidentiality or privilege is not waived or lost because this e-mail has been
sent to you in error. If you are not the intended recipient any use,
disclosure or copying of this e-mail is prohibited. If you have received it in
error please notify the sender immediately by reply e-mail and destroy all
copies of this e-mail and any attachments. All liability for direct and
indirect loss arising from this e-mail and any attachments is hereby disclaimed
to the extent permitted by law.
#####################################################################################
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
Other related posts:
