[THIN] Re: Server Replication
- From: "Hamilton, Ronnie" <ronnie.hamilton@xxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 2 May 2007 10:14:04 +0100
Hi Nick,
we create a base OS fully patched and have all our software created as
MSI's which are then depolyed via a GPO seting in AS.
Its worked quite well for us.
ROn
________________________________
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Nick Smith
Sent: 02 May 2007 10:11
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Server Replication
A general question. Our 'farm' has finally reached the point where we
will need to be having identical servers (Yes I know relying on single
servers is bad practice, but cost constraints are high) in load-balanced
mode. This is plain Terminal Server 2003. I'm more or less on top of the
session-sharing elements, but would appreciate opinions on the best
methodologies/software to replicate current servers, and/or ensure new
builds are identical.
Any advice greatly welcomed.
Nick
This e-mail is confidential and is intended only for the attention of
the addressee.
If you are not the intended recipient, this e-mail should not be
disclosed to any other person.
Please notify the sender immediately and delete this e-mail from your
computer system.
Although this e-mail has been checked for viruses and other defects,
no responsibility can be accepted for any loss or damage arising from
its receipt or use.
Visit our website : www.ltai.ie
__________________________________________
Lufthansa Technik Airmotive Ireland Limited. Registered in Ireland. Reg. No.
45999. Registered Office: Naas Road, Rathcoole, Co.Dublin.
Lufthansa Technik Airmotive Ireland Leasing Limited. Registered in Ireland.
Reg. No. 140891. Registered Office: Naas Road, Rathcoole, Co.Dublin.
__________________________________________
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed. If
you have received this email in error, please advise by return email and delete
all copies of the message.
Other related posts:
