[THIN] Re: Server Lockups -- Please Help
- From: DMelczer@xxxxxxxx
- To: thin@xxxxxxxxxxxxx
- Date: Mon, 14 Oct 2002 14:37:44 -0400
Thanks, Jay...I had heard about that as well, so I didn't install the
OpenManage client on these machines...
Thanks for the suggestion, though...
At least the worst that can happen is getting fired...it's not like I'm
going to get beheaded or anything... ;-)
-Dave Melczer
dmelczer@xxxxxxxx
-----Original Message-----
From: Jensen, Jay [mailto:jjensen@xxxxxxxxx]
Sent: Monday, October 14, 2002 2:26 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: Server Lockups -- Please Help
Do you run Dell OpenManager? The original version of Dell OpenManage has
some problems that affected the CMC. Newer version of Dell OpenManage fixes
that problem as I have heard. I believe the older versions had a conflict
with the Dell Assistant Web Page that was in conflict with the Data Store
refresh of the CMC. Contact Dell to make find out for sure if this is
potentially your problem.
I am only basing this on some experiences that we experienced and found out
that this was a known bug in Dell's Management software.
Jay
-----Original Message-----
From: DMelczer@xxxxxxxx [mailto:DMelczer@xxxxxxxx]
Sent: Monday, October 14, 2002 1:15 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Server Lockups -- Please Help
I've never seen this one before in 6 years working with Citrix products,
perhaps someone out there can help:
Hardware: 2 new Dell 1650 PowerEdge Servers
Dual 1.2 Ghz processors
2 Gig RAM
Intel Pro NICs (2) teamed copper gigabit
Software: Microsoft NT4 Terminal Server Edition, SP6a
MetaFrame XP 1.0 Service Pack 1 / FR1
Problem: The system is fine and stable for hours on end, even under a
moderately heavy load (9 hours, 18+ users concurrent). Then, all of a
sudden everything just stops -- server can be pinged, and mouse movements
allowed on the console, but nothing else. All sessions refuse to screen
paint and lock up. The only way to get the server out of this mode is to
power it off and power it on.
Solutions tried:
- Removed all printer port monitors
- Recreated local host cache
- Reinstalled MetaFrame XP, FR1, Hotfixes 1, 2, 8, 11, 12, 16.
- Reinstalled SP6a for TSE
- Re-created ICA connection in Connection Config Application
- Set Priority on the teamed NICs
- Updated drivers for NICs
- Tried removing NICs from team and running with a single NIC active (tried
both NICs)
- Tried to hard-code NIC speeds and duplexes to avoid autosensing (can't do
it -- Intel PRO software doesn't allow hard-coding of gigabit...autosense
only...allows hardcoding of 10/100 at full/half, just nothing gigabit)
Has ANYONE seen anything like this before? I'm preparing myself for the
infamous pinkslip...
Any suggestions welcomed, on or off list.
-Dave Melczer
dmelczer@xxxxxxxx
****************************************************************************
*
Please be advised that this transmittal may be a confidential
attorney-client communication or may otherwise be privileged or
confidential. If you are not the intended recipient, please do not read,
copy or re-transmit this communication. If you have received this
communication in error, please notify us by e-mail (postmaster@xxxxxxxx) or
by telephone (call us collect at 212-403-4357) and delete this message and
any attachments. Thank you in advance for your cooperation and assistance.
****************************************************************************
*
**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
**********************************************
This weeks sponsor 99Point9.com
99Point9 helps solve your unresolved technical
server-based questions, issues and incidents.
http://www.99point9.com
***********************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
