[THIN] Re: Secure Gateway 3.0 and Web Interface 4.5.1 question

I have the FQDN for the WI Gateway settings and I have the default access
method set to "Gateway Direct". In the configure CSG wizard, I have been
accepting the default of "Indirect" and leaving "Installed on this computer"
enabled. As I do want the users to enter in the url of the secure
gateway....and WI is installed locally.

I will go search through more doco.

:)

On Thu, Jun 26, 2008 at 5:40 PM, Steve Greenberg <steveg@xxxxxxxxxxxxxx>
wrote:

>  Sorry, I don't have a CSG install handy to look at. There are two pieces-
> WI has to have it's DMZ setting to talk in gateway mode to the CSG with the
> FQDN of the CSG which is the outside public name not the WI site name. Then
> CSG should have a link value to where it forward to the WI but I don't know
> which screen that would be on….
>
>
>
>
>
> *Steve Greenberg*
>
> Thin Client Computing
>
> 34522 N. Scottsdale Rd D8453
>
> Scottsdale, AZ 85266
>
> *(602) 432-8649*
>
> www.thinclient.net
>
> *steveg@xxxxxxxxxxxxxx*
>
>
>  ------------------------------
>
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> Behalf Of *cherie.watts Watts
> *Sent:* Thursday, June 26, 2008 8:57 AM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: Secure Gateway 3.0 and Web Interface 4.5.1 question
>
>
>
> Hi Steve
>
>
>
> OK, oops on the subject, I meant WI 4.5.1.
>
>
>
> When you are referring to the value for CSG...do mean this particular
> screen!! (Attached snap)
>
>
>
> I have entered the WI address
> https://blsecure.bl.uk:444/Citrix/AccessPlatform, can't find server.
>
> Tried https://blsecure.bl.uk/Citrix/AccessPlatform no luck either
>
>
>
> This is all on my testlan.
>
>
>
>  Thanks for the help
>
>
>
>
>
> On Thu, Jun 26, 2008 at 1:56 PM, Steve Greenberg <steveg@xxxxxxxxxxxxxx>
> wrote:
>
> What value are you putting in on the CSG for the Web Interface? If you only
> put the server name or ip address it will launch the default site on IIS.
> You may have to specify the full path, in the newer web interface it is
>
>
>
> Servername/Citrix/AccessPlatform
>
>
>
> I don't remember what 3.51 one was exactly, but something like
>
>
>
> Servername/Citrix/Metaframe/WebInterface
>
>
>
>
>
> *Steve Greenberg*
>
> Thin Client Computing
>
> 34522 N. Scottsdale Rd D8453
>
> Scottsdale, AZ 85266
>
> *(602) 432-8649*
>
> www.thinclient.net
>
> *steveg@xxxxxxxxxxxxxx*
>
>
>  ------------------------------
>
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> Behalf Of *cherie.watts Watts
> *Sent:* Thursday, June 26, 2008 4:46 AM
>
>
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Secure Gateway 3.0 and Web Interface 3.5.1 question
>
>
>
> Hi Everyone
>
>
>
> I have just about driven myself crazy trying to configure these.
>
>
>
> I have no problems connecting with Secure Gateway if Web Interface is
> installed into the Default website on the IIS server. But if I create it in
> a new website in IIS and set Web Interface site etc... This all works from
> the Web Interface links. But Secure Gateway persists in opening the
> iistart.htm in the default website.
>
>
>
> I am not sure if it is a config problem in Web Interface or Secure
> Gateway..
>
>
>
> What am I doing wrong or not doing?? Please help
>
>
>
> Thanks
>
> Cherie
>
>
>

Other related posts: