[THIN] Re: Problem with the Terminal Server
- From: "Carl Stalhood" <cstalhood@xxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 10 Apr 2007 18:07:15 -0500
I don't know of any way to do this without using Citrix PS 4 and its Virtual
IP feature.
The behavior you describe below is how it works. The primary IP bound to the
NIC is the IP it uses for outbound traffic.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of krishna kumar
Sent: Tuesday, April 10, 2007 1:00 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Problem with the Terminal Server
Hi all,
I am stuclk with a Scenario in a typical network environment.I will
explain my scenario and want your solutions about the problem.
I created a Virtual Interface in my Windows Server 2000 by following these
steps
Control Panel->Network Connections->Local Area Connection ->
Properties->TCP/IP->Properties->Advanced Properties - >ADD IP,Subnet Mask.
This will actually allow multiple IP Addresses for a single nic.
Now I have configured these ips in my windows
124.7.x.253(physical NIc)
124.7.x.115(virtual IP,Added to the Same NIC)
124.7.x.200(virtual IP,Added to the Same NIC)
Now i am able to connect to the Windows server using all the above ips .i.e
I am able to use 124.7.x.115 to connect to that server.
But now after I login to that windows and browse the Internet ,I
examined the Output traffic using ethereal tool.It shows alll http traffic
is from the IP that is physically binded to the NIC(in this case
124.7.x.251
)
I have the following questions
If i am able to connect to the Virtual IP using RDP(remote desktop) ,then
the output traffic from that session must also be from the Virtual ip
If this is not possible ,Please suggest someother way.
--
Bye,
Krishnakumar.c
Mobile - 9840724253
Chennai
Other related posts:
