[THIN] Re: Post MF SP3 slow logons....

  • From: "Schneider, Chad M." <CMSchneider@xxxxxxxxx>
  • To: thin@xxxxxxxxxxxxx
  • Date: Tue, 26 Aug 2003 13:05:02 -0500

Here is where I got on the trail....
&fromSearchPage=true> &entryID=3008&fromSearchPage=true
This would also affect RDP, as the pass-through affects both the
userlogon.cmd and logon scripts.


From: Ryan Lambert [mailto:rlambert@xxxxxxxxxxxxxxx] 
Sent: Tuesday, August 26, 2003 12:47 PM
To: thin@xxxxxxxxxxxxx



Just curious.


You said this was affecting RDP connections as well. 


From: Schneider, Chad M. [mailto:CMSchneider@xxxxxxxxx] 
Sent: Monday, August 25, 2003 12:38 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: POST MF SP3 asynchronous logons


Slow logons are for both ICa and RDP.  Waiting for the script to finish.


What would Metaframe PTA have to do with login times via RDP? You sure there
isn't something else going on there?



-----Original Message-----
From: Schneider, Chad M. [mailto:CMSchneider@xxxxxxxxx] 
Sent: Tuesday, August 26, 2003 11:45 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Post MF SP3 slow logons....




That appears to be it.  I turn off pass through on the client, and off it
goes, running asynch again.


Now, I did it logged on as me.  That will only alter my appsrv.ini.  I need
to alter the main appsrv.ini and then any for the connected users.



From: Schneider, Chad M. 
Sent: Tuesday, August 26, 2003 10:35 AM
To: 'thin@xxxxxxxxxxxxx'

I just thought of something.....


During the install of MF SP3 or upgrade to it, you are asked about enabling
pass-through.  I have told it yes each time, as I would like to use
pass-through, some day.  We are not using it at this time.


Could this be of issue?  Can I turn off the pass-through on the servers?  I
turned it on after learning that if you don't enable it, you can't down the


Chad Schneider
Technology Analyst
Bemis IT


Other related posts: