[THIN] Re: Packetshaper and Citrix

Here is Cisco's article on autonegotiation and duplex speeds...
  
http://www.cisco.com/en/US/tech/tk389/tk214/technologies_tech_note09186a0080094781.shtml
   
  It is very common to see switches set at Half duplex and server cards set at 
full duplex or visa versa and this creates a big bottleneck.
  Jim
  

"Parr, Steve" <> wrote:
      Thanks Jim!

    
---------------------------------
  From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf 
Of Jim Kenzig http://ThinHelp.com
Sent: Tuesday, June 27, 2006 2:23 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Packetshaper and Citrix


  
  If anything the packetshaper should improve the performance not hinder it.  
If it is network issues I would start looking at portfast settings if cisco 
switches..
  http://www.cisco.com/warp/public/473/12.html And also make sure that duplex 
speeds are properly configured on the server network cards and switches.  
Also check out Michaels article on performance issues where he touches on the 
Maxworkitems registry keys..
   
  
http://www.msterminalservices.org/articles/Fileserving-Terminal-Server-Environments-Part2.html
   
  JK
  
"Parr, Steve" <sparr@xxxxxxxxxxxxx> wrote:
  Will be troubleshooting a situation at a company where Packetshaper is used 
including Citrix traffic. Any heads up about the use of Packetshaper and 
Citrix. Apparently they are having some performance issues.

Other related posts: