[THIN] Re: PSE400R01W2K3053 Issue - IMA will not start
- From: "M" <mathras@xxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Sat, 6 May 2006 18:24:47 +0100
I have just desployed PSE400R01W2K3053 by using Installation Manager, no issues.
However, im not using an Access DataStore.
Have you got a test server ?
I can send you:
PSE400R01W2k3006 (original version of the handle fix)
or
PSE400R01W2k3030 (2nd update) if you want to test those.
----- Original Message -----
From: Ivo Pastyrik
To: thin@xxxxxxxxxxxxx
Sent: Saturday, May 06, 2006 5:53 PM
Subject: [THIN] Re: PSE400R01W2K3053 Issue - IMA will not start
I have these hotfixes installed:
PSE400R01W2k3007
PSE400R01W2k3026
PSE400W2k3R01
Yes, there events in Application log that some files was held and installer
has initiated system restart.
There is also event that HotFix was sucessfully installed.
After restart HotFix was visible under Add/Remove programs in Control panel,
but was NOT visible in CMC.
Ivo
----- Original Message -----
From: M
To: thin@xxxxxxxxxxxxx
Sent: Saturday, May 06, 2006 6:29 PM
Subject: [THIN] Re: PSE400R01W2K3053 Issue - IMA will not start
What existing hotfixes have you got installed ?
Anything in the event log to indicate whether all your files got replaced ?
----- Original Message -----
From: Ivo Pastyrik
To: thin@xxxxxxxxxxxxx
Sent: Saturday, May 06, 2006 5:15 PM
Subject: [THIN] Re: PSE400R01W2K3053 Issue - IMA will not start
I'm using Access datastore on one server in farm.
I tried dsmaint, but it did not help.
Uninstalling hotfix then Chfarm and rejoining farm resolved IMA startup
problem.
But I want this hotfix installed, because users are facing "Invalid menu
handle" problem and I hope that this will help.
Ivo
----- Original Message -----
From: Greg Reese
To: thin@xxxxxxxxxxxxx
Sent: Saturday, May 06, 2006 6:02 PM
Subject: [THIN] Re: PSE400R01W2K3053 Issue - IMA will not start
try using dsmanint to restablish your connection to the datastore.
What are you using for the datastore?
Greg
On 5/7/06, Ivo Pastyrik < plaka@xxxxxxxxxx> wrote:
Greetings to all Gurus here.
I want to install PSE400R01W2K3053 hotfix, because of "Invalid menu
handle".
But when I restart server after aplying this hotfix IMA will not
start with following series of error:
----
Event Type: Error
Event Source: IMAService
Event Category: None
Event ID: 3609
Description:
Failed to load plugin ImaPsSs.dll with error IMA_RESULT_FAILURE
----
Event Type: Error
Event Source: IMAService
Event Category: None
Event ID: 3609
Description:
Failed to load plugin ImaRuntimeSS.dll with error IMA_RESULT_FAILURE
----
Event Type: Error
Event Source: IMAService
Event Category: None
Event ID: 3601
Description:
Failed to load initial plugins with error IMA_RESULT_FAILURE
---
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Description:
The Independent Management Architecture service terminated with
service-specific error 2147483649 (0x80000001).
----
Any idea ?
I will appreciate any help.
Thank you in advance.
Regards,
Ivo Pastyrik
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
Other related posts:
