[THIN] Re: PS 4 issue
- From: "Andrew Wood" <andrew.wood@xxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Mon, 23 Mar 2009 11:55:39 -0000
Configure flags to be a dword entry -
set the dword entry to have a decimal value
set the deimal value of 16.
This gives a hex value of 0x000000010
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Shankar, Shiva
Sent: 23 March 2009 11:19
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: PS 4 issue
Hello,
I can't add 0x10 "X" doesn't take under Dword any other way ?
Thanks & Regards,
Shiva Shankar S | Senior System Engineer, Asia Pacific
phone +65 6511 9241 | Fax +65 6274 9930
3 Harbourfront Place | #08-03 HarbourFront Tower
sshankar@xxxxxxxxxxxxxxxxxxx | www.carlsonwagonlit.com
cid:image001.gif@01C8C6FF.9D8924B0
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Andrew Wood
Sent: Monday, March 23, 2009 6:11 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: PS 4 issue
http://support.citrix.com/article/CTX846521
create the following registry key if it doesn't exist:
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\
CurrentVersion\TerminalServer\Compatibility\Applications\appname
Where appname is the name of the application
Add the DWORD value "Flags" - set the value of Flags to be 0x10
That should mean that the application returns the username of the user
rather than the servername.
Unless the application has been written badly and/or that goes against your
Harmony license agreement.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Shankar, Shiva
Sent: 23 March 2009 02:09
To: thin@xxxxxxxxxxxxx
Subject: [THIN] PS 4 issue
Hello expertise Team,
We are running Citrix PS 4 server & our clients are all using WyseTerm S10
accessing through publish desktop
We have a Harmony application running on other citrix server, By design this
application only allows one application session per hostname A unique
hostname must pass through for each user attempting to access harmony
application.
Here issue our citrix client always use the PS server name, only one user
can connect if other users try to connect it's unsuccessful, is there any
possible to publish unique name for each client through publish desktop, or
any other solution.
Thanks & Regards,
Shiva Shankar S | Senior System Engineer, Asia Pacific
phone +65 6511 9241 | Fax +65 6274 9930
3 Harbourfront Place | #08-03 HarbourFront Tower
sshankar@xxxxxxxxxxxxxxxxxxx | www.carlsonwagonlit.com
cid:image001.gif@01C8C6FF.9D8924B0
Other related posts: