I can try that and it would probably work but it doesn't actually solve the problem. I'll test it though -----Original Message----- From: Chris McNally [mailto:cmcnally@xxxxxxxxxxxxxxxxxxx] Sent: Thursday August 05, 2004 11:31 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Odd problem Would it help to make the file Read Only? _____ From: Bill Beckett [mailto:Bill.beckett@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 05, 2004 6:38 AM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: Odd problem Bingo Alan. That is exactly what the local machine has. However, here is the continuation of theproblem...I go into the uistate.ini and change the width and height back to what it should be then save it. I then go to PN and launch a desktop, the connection briefly negotitates then disappears again. Now I go back into the uistate.ini file, it's back to 0 and 0. I've checked and double checked the ini file and its being saved with the correct dimensions, however it seems like each time I try to launch the desktop, the program is changing the settings back to zero. -----Original Message----- From: Hutchinson, Alan [mailto:Alan.Hutchinson@xxxxxxxxxxxxxxxxxx] Sent: Thursday, August 05, 2004 4:49 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Odd problem I've seen this on a couple of XP workstations. It was a combination of two issues but I can only remember one of them at the momemnt. Check the uistate.ini file and you may find that the display size is effectively 0 by 0 DeskTopWidth=0 DeskTopHeight=0 which should be something like DeskTopWidth=800 DeskTopHeight=600 File is in users profile under Application Data\ICA Client. I'll try to remeber what the other was. Regards, Alan. -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Steve Raffensberger Sent: 04 August 2004 16:48 To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Odd problem Bill, That's not an odd problem at all. However, it requires a little more information to diagnose. 1. Are the disconnected users still logged into the server(s) when this happens? 2. You say that they can move to another workstation and connect...can they reconnect from the original workstation? 3. Is the "another workstation" on the same subnet as the affected workstation? The traditional first tuning trick is to mess with ICA timeout and/or TCP timeout settings. Increasing them makes disconnects happen later. There should be TONS of previous posts in the archives on this subject. HTH, Raff -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Beckett Sent: Wednesday, August 04, 2004 11:15 AM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Odd problem Has anyone experienced this oddity? Running MF 1.8 on a W2K server, all patches current. We have two workstations (running XP) that will try to connect to a server dekstop via PN 8.0 and the connection will negotiate and then all of a sudden disappear. No error message, just goes away. If the same user moves to another workstation, they are able to connect.