outlook over the internet...are you smoking crack?
-----Original Message-----
From: Jeanne Shotton [mailto:jeanne@xxxxxxxxxxxxxxxxx]
Sent: Wednesday, August 27, 2003 3:06 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Exchange thru internet
amen
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of M
Sent: Wednesday, August 27, 2003 5:04 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Exchange thru internet
Dare i mention the words Citrix Secure Gateway ? i did think
this was a Citrix forum :¬)
----- Original Message -----
From: Michael Boggan <mailto:MBoggan@xxxxxxxxxxx>
To: 'thin@xxxxxxxxxxxxx'
Sent: Wednesday, August 27, 2003 10:53 PM
Subject: [THIN] Re: OT: Exchange thru internet
yeah i changed the DS and IS ports to 5000 and 5001
respectively and had all this working using RPC on the 135 working. but had to
close 135 when blaster came out. if you find a way to change the 135 to
somethign else, i'd really like to. i have many users wanting the outlook over
the internet to work again.
_________________________________
Michael Boggan
Network Engineer/Citrix Admin
Virtual Desktop Inc.
Dallas, Texas
Ph: (972) 960-6400
Fax: (972) 960-6445
email: mboggan@xxxxxxxxxxx
http://www.virtualdesktopinc.com
<http://www.virtualdesktopinc.com/>
_________________________________
For Technical Support during business hours please send
email to support@xxxxxxxxxxx or call the above toll free number for afterhours
support.
-----Original Message-----
From: Henry Sieff [mailto:hsieff@xxxxxxxxxxxx]
Sent: Wednesday, August 27, 2003 4:07 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: OT: Exchange thru internet
You can change the endpoint itself (the link I
sent describes that process). The endpoint mapper is a different ball of wax.
If you did actually do that, then I am absolutely all ears, since this is a
perennially recurring topic on several security mailing lists I am on, and the
general consensus has always been: don't allow exchange access direct from the
internet because of all the nasties out there.
Anyways, let me know what you find.
-----Original Message-----
From: Magnus [mailto:magnus@xxxxxxxx]
Sent: Wednesday, August 27, 2003 3:29 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Exchange thru
internet
If I recall correctly we did change the
RPC endpoint for it. I will have to double check my notes though (I could be
wrong)
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Henry Sieff
Sent: Wednesday, August 27, 2003 3:20 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: OT: Exchange thru
internet
Nope. You can change the ports exchange
uses, but not the RPC endpoint mapper port on 135.
http://support.microsoft.com/default.aspx?scid=kb;en-us;155831 details how to
change the ports exchange uses, but there is no way to change the RPC endpoint
mapper service port number. Keep in mind that the client still has to identify
which ports the exchange service is listening on, and that requires a service
which uses a port that the client knows about ahead of time, in this case, RPC
on 135.
-----Original Message-----
From: Magnus [mailto:magnus@xxxxxxxx]
Sent: Wednesday, August 27, 2003 11:02
AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Exchange thru
internet
Actualy you change change the port to a
static port(by default it will dynamically assign the port once it gets
connected) even the TCP 135 port. There are a couple of MS KB's on it (sorry I
dont have the numbers) I ended up calling ms and I had it set up in about 20
minutes
Magnus
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Henry Sieff
Sent: Wednesday, August 27, 2003 11:49
AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: OT: Exchange thru
internet
To use the full exchange server client,
you must open up the RPC endpoint mapper port (135). You can set which port
exchange actually ends up using, but 135 is used to initiate the process
whereby the client learns that port number.
-----Original Message-----
From: Michael Boggan
[mailto:MBoggan@xxxxxxxxxxx]
Sent: Wednesday, August 27, 2003 10:41
AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] OT: Exchange thru
internet
I want to be able to hit my exchange
thru the internet but to do it it says that the RPC port 135 has to be opened.
Well I don't want to do that for obvious reasons. Is there a way to change
which port the RPC uses for exchange?
_________________________________
Michael Boggan
Network Engineer/Citrix Admin
Virtual Desktop Inc.
Dallas, Texas
Ph: (972) 960-6400
Fax: (972) 960-6445
email: mboggan@xxxxxxxxxxx
http://www.virtualdesktopinc.com
<http://www.virtualdesktopinc.com/>
_________________________________
For Technical Support during business
hours please send email to support@xxxxxxxxxxx or call the above toll free
number for afterhours support.