[THIN] Re: New MS Terminal Server
- From: Anthony_Baldwin@xxxxxxxxx
- To: thin@xxxxxxxxxxxxx
- Date: Tue, 15 Dec 2009 15:37:42 -0500
Doug,
For issue #1...
Is the computer account of the non-working server in the same AD OU as the
working server?
You should be able to run 'gpresult' from the command line on the
non-working server and get a list of applied Group Policies, if there are
any.
Could, maybe, be a problem with the local profile of your user account?
For issue #2...
Any way to print a test page directly from the Wyse terminal to the
printer (maybe like what's stated here...
http://support.microsoft.com/kb/314085)
Tony
"Doug Rooney" <Doug@xxxxxxxxxxxxxxxxxxxx>
Sent by: thin-bounce@xxxxxxxxxxxxx
12/15/2009 03:12 PM
Please respond to
thin@xxxxxxxxxxxxx
To
<thin@xxxxxxxxxxxxx>
cc
Subject
[THIN] Re: New MS Terminal Server
Tony,
Not sure what a loopback group policy is or how to check.
I looked in the event viewer, it just says that the printer printed, the
printer is connected to the Wyse terminal via LPT cable.
Thank You
~Doug Rooney
Sonoma Tilemakers
IT Manager
7750 Bell Rd.
Windsor Ca, 95492
(707) 837-8177 X211
(707) 837-9472 FAX
it@xxxxxxxxxxxxxxxxxxxx
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Anthony_Baldwin@xxxxxxxxx
Sent: Tuesday, December 15, 2009 12:10 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: New MS Terminal Server
Doug,
For issue #1, maybe a loopback Group Policy that's applying to the
computer account?
For issue #2, are you seeing anything in the Event Viewer when you try to
print? Is the printer directly connected or does it go through a print
server, IP printing, etc?
Tony
"Doug Rooney" <Doug@xxxxxxxxxxxxxxxxxxxx>
Sent by: thin-bounce@xxxxxxxxxxxxx
12/15/2009 02:56 PM
Please respond to
thin@xxxxxxxxxxxxx
To
<thin@xxxxxxxxxxxxx>
cc
Subject
[THIN] Re: New MS Terminal Server
OK, well no comments so far?
Issues #1 persists?
Issues #2, the user can now add a printer, when I sent anything to that
printer it acts just like it is printing, but nothing come out of the
printer.
Now bear in mind, if I log into a different terminal server, everything
works just fine.
Thank You
~Doug Rooney
Sonoma Tilemakers
IT Manager
7750 Bell Rd.
Windsor Ca, 95492
(707) 837-8177 X211
(707) 837-9472 FAX
it@xxxxxxxxxxxxxxxxxxxx
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Doug Rooney
Sent: Tuesday, December 15, 2009 9:13 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] New MS Terminal Server
Hello all,
So I had post a few days back about my label printing issue, well nothing
resolved it, so the decision was made to totally rebuild the server, so I
am.
Well I have several issues,
#1, I log directly into the machine as Administrator, yet I only have the
choice to log out, not restart or shutdown?!?
#2, When I log in as a user, I cannot add a printer, if I add it as
Administrator, the user cannot use it properly.
These 2 are the current BIG issues.
Any thoughts?
Thank You
~Doug Rooney
Sonoma Tilemakers
IT Manager
7750 Bell Rd.
Windsor Ca, 95492
(707) 837-8177 X211
(707) 837-9472 FAX
it@xxxxxxxxxxxxxxxxxxxx
CONFIDENTIALITY NOTICE: This message, including any attachments, is for
the sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution
is prohibited. If you are not the intended recipient, please contact the
sender by reply e-mail and destroy all copies of the original message.
CONFIDENTIALITY NOTICE: This message, including any attachments, is for
the sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution
is prohibited. If you are not the intended recipient, please contact the
sender by reply e-mail and destroy all copies of the original message.
Other related posts:
