Then that's all you need. 2009/7/2 Mubiru Edwin Moses <mubirum@xxxxxxxx> > Yes I have igmp snooping running by default and ive not seen anything > unusual on my LAN yet. > > > > Thanks > > > > *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On > Behalf Of *Berny Stapleton > *Sent:* 02 July 2009 09:54 AM > *To:* thin@xxxxxxxxxxxxx > *Subject:* [THIN] Re: Multicast CISCO config > > > > I presume you have ip igmp snooping turned on. > > If you aren't sending this stuff around between too many switches or > routing it across your WAN, you don't need Rendezvous points or anything > like that. IGMP will do predominately what you want. If you are going > between multiple VLANs then you will need to turn on sparse-dense mode. > > Berny > > 2009/7/2 Mubiru Edwin Moses <mubirum@xxxxxxxx> > > Hi All > > > > When running NLB on the terminal servers with Multicast IGMP enabled, does > anyone know the specific Cisco configurations on the switch. I am running a > 3600 series switch with this config and so far no problems but I want to be > sure that none will crop up on the switching side of things > > > > Thanks > > > > Moses > > This email and any files transmitted with it are confidential and intended > solely for the use of the individual or entity to whom they are addressed. > If you have received this email in error please notify the system manager. > This message contains confidential information and is intended only for the > individual named. If you are not the named addressee you should not > disseminate, distribute or copy this e-mail. > > > This email and any files transmitted with it are confidential and intended > solely for the use of the individual or entity to whom they are addressed. > If you have received this email in error please notify the system manager. > This message contains confidential information and is intended only for the > individual named. If you are not the named addressee you should not > disseminate, distribute or copy this e-mail. >