[THIN] Re: Load Balancing not working
- From: Philip Walley <mythinlist@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Thu, 01 Jun 2006 13:38:47 -0500
i would think so
Schneider, Chad M wrote:
Do I need to restart the IMA after changing the load evaluator on a server?
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Schneider, Chad M
Sent: Thursday, June 01, 2006 11:31 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Load Balancing not working
Trying that now.
Default being used for load balancing of both the servers as well as the
applications affected.
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Philip Walley
Sent: Thursday, June 01, 2006 10:54 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Load Balancing not working
have you switched back to the default evaluator to see if the problem
goes away. I remember back in XP there were some issues that I saw where
custom load evaluators were not working properly and had to be recreated.
Schneider, Chad M wrote:
I have apps. spread across 8 servers, all are using only load
evaluator based on users load. All are @ 50% of that load #, yet users
can't get into appliations on those servers, as the server lists as
unavailable. If I knock a few users who are idle for a couple hours
off, then user can get in, until the server gets "busy" again.
The servers are not busy, DL360's, MPS 4.0 R01, W2K and W2K3 servers.
Thoughts?
Chad Schneider
Technology Analyst/Citrix Admin.
Bemis Company, Inc.
920-303-7609
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************
- References:
- [THIN] Re: Load Balancing not working
- From: Schneider, Chad M
Other related posts:
- » [THIN] Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
- » [THIN] Re: Load Balancing not working
Do I need to restart the IMA after changing the load evaluator on a server?
-----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Schneider, Chad M Sent: Thursday, June 01, 2006 11:31 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Load Balancing not working
Trying that now.
Default being used for load balancing of both the servers as well as the applications affected.
-----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Philip Walley Sent: Thursday, June 01, 2006 10:54 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Load Balancing not working
have you switched back to the default evaluator to see if the problem goes away. I remember back in XP there were some issues that I saw where custom load evaluators were not working properly and had to be recreated.
Schneider, Chad M wrote:
I have apps. spread across 8 servers, all are using only load evaluator based on users load. All are @ 50% of that load #, yet users can't get into appliations on those servers, as the server lists as unavailable. If I knock a few users who are idle for a couple hours off, then user can get in, until the server gets "busy" again.************************************************
The servers are not busy, DL360's, MPS 4.0 R01, W2K and W2K3 servers.
Thoughts?
Chad Schneider
Technology Analyst/Citrix Admin.
Bemis Company, Inc.
920-303-7609
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************
- [THIN] Re: Load Balancing not working
- From: Schneider, Chad M