[THIN] Re: Issue with AG 4.2.2 code

No the same config. I'm using it without AAC, so the authentication is done
from the AG to the Domain Controllers through the firewall. We've got TCP
389 open (amongst others), but are getting the unsuccessful bind errors.

 Kind regards,

 Jeremy Saunders
 Senior Technical Specialist

 Infrastructure Technology Services
 (ITS) & Cerulean
 Global Technology Services (GTS)
 IBM Australia
 Level 2, 1060 Hay Street
 West Perth  WA  6005

 Visit us at
 http://www.ibm.com/services/au/its

 P:  +61 8 9261 8412                F:  +61 8 9261 8486
 M:  TBA                            E-mail:
                                    jeremy.saunders@xxxxxxxxxxx










                                                                       
             "Pavlo Ignatusha"                                         
             <Pavlo.Ignatusha@                                         
             pemreghos.org>                                             To
             Sent by:                  <thin@xxxxxxxxxxxxx>            
             thin-bounce@freel                                          cc
             ists.org                                                  
                                                                   Subject
                                       [THIN] Re: Issue with AG 4.2.2 code
             30/05/2006 08:26                                          
             PM                                                        
                                                                       
                                                                       
             Please respond to                                         
                   thin                                                
                                                                       
                                                                       




We are running 4.2.2 with AAC and authenticate to AD. It seems to work fine
(updated May 24).

Thanks,

Pavlo Ignatusha
Systems Network Coordinator
Pembroke Regional Hospital
tel.  +1 (613) 732-3675 ext.6150
fax.  +1 (613) 732-9986

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Jeremy Saunders
Sent: May 30, 2006 7:55 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Issue with AG 4.2.2 code

Hi,

I've just set up a new AG with the latest code and we are unable to use the
LDAP Authentication. The logs give us an unsuccessful bind error, which we
cannot explain, as an ldap authentication to their domain controllers is
working fine from my laptop, etc, and there is nothing being blocked on the
firewall between the AG and the domain controllers.

Has anyone else found any issues with this release of code?

Just the AG...no AAC involved here.

Cheers.

 Kind regards,

 Jeremy Saunders
 Senior Technical Specialist

 Infrastructure Technology Services
 (ITS) & Cerulean
 Global Technology Services (GTS)
 IBM Australia
 Level 2, 1060 Hay Street
 West Perth  WA  6005

 Visit us at
 http://www.ibm.com/services/au/its

 P:  +61 8 9261 8412                F:  +61 8 9261 8486
 M:  TBA                            E-mail:
                                    jeremy.saunders@xxxxxxxxxxx









************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************

--
The information in this email belongs to the Pembroke Regional Hospital
and may contain confidential and privileged information for the sole use
of the individual or organization to which it is addressed.  If you are
not the intended recipient, you are hereby notified that any disclosure,
copying or distribution of the contents of this email is prohibited.
If you have received this email in error, please contact the sender and
destroy all copies of the original message.

************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************

Other related posts: