[THIN] Re: How to setup EMF printing for Presentation Server4?
- From: "Carl Stalhood" <cstalhood@xxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 28 Mar 2006 19:31:26 -0600
When you look at the driver for an auto-created printer, is it the Citrix
Universal Printer or is it HP Color LaserJet 4500? Your clients must be
Win32 version 9.0 or above to use the new UPD. Also, modify the Citrix
policy so that the UPD is always used even if an installed driver with the
same name is available.
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Steve Parr
Sent: Tuesday, March 28, 2006 3:47 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: How to setup EMF printing for Presentation Server4?
Yes there is a registry entry (from The Avd Concepts Metaframe Adm Guide)
and tried to set the policy suggested as well but no go. By default things
seem to work very much like previously where you can map to the old UPD's
which are all still there or to native print drivers that are on both client
wkstn and server(or you create mapping to another driver on server). Seems
same as before except there are a lot more additional print policies that
have moved to policies and used to be accessed via printers in CMC. Still
just not able to get the EMF printing working..
-----Original Message-----
From: Joe Shonk [mailto:joe.shonk@xxxxxxxxx]
Sent: Tuesday, March 28, 2006 4:22 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: How to setup EMF printing for Presentation Server4?
You have to setup a Citrix Policy if you wish to use EMF printing... So by
default, it's not enabled.
Joe
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Matthew Shrewsbury
Sent: Tuesday, March 28, 2006 2:11 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: How to setup EMF printing for Presentation Server4?
I was under the impression that EMF printing was on by default.
Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+
Network Manager
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Steve Parr
Sent: Tuesday, March 28, 2006 4:16 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] How to setup EMF printing for Presentation Server4?
Have tried in test lab but not working yet?
Steve Parr
Metroland Printing, Publishing and Distributing Ltd.
Other related posts:
