[THIN] Re: How to setup EMF printing for Presentation Server4 ?
- From: "Jeff Pitsch" <jepitsch@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Tue, 28 Mar 2006 17:45:59 -0500
EMF printing IS the new UPD. that entry in the registry is not what your
looking for. You setup your printers to use UPD, if UPD is being used as
the driver (new UPD, not the old UPD's) then you have EMF printing. Simple
as that.
Jeff
On 3/28/06, Steve Parr <sparr@xxxxxxxxxxxxx> wrote:
>
> Yes there is a registry entry (from The Avd Concepts Metaframe Adm Guide)
> and tried to set the policy suggested as well but no go. By default things
> seem to work very much like previously where you can map to the old
> UPD'swhich are all still there or to native print drivers that are on both
> client
> wkstn and server(or you create mapping to another driver on server). Seems
> same as before except there are a lot more additional print policies that
> have moved to policies and used to be accessed via printers in CMC. Still
> just not able to get the EMF printing working..
>
>
>
> -----Original Message-----
> *From:* Joe Shonk [mailto:joe.shonk@xxxxxxxxx]
> *Sent:* Tuesday, March 28, 2006 4:22 PM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: How to setup EMF printing for Presentation Server4?
>
>
>
> You have to setup a Citrix Policy if you wish to use EMF printing... So
> by default, it's not enabled.
>
>
>
> Joe
>
>
> ------------------------------
>
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> Behalf Of *Matthew Shrewsbury
> *Sent:* Tuesday, March 28, 2006 2:11 PM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: How to setup EMF printing for Presentation Server4?
>
>
>
> I was under the impression that EMF printing was on by default.
>
>
>
> *Matthew Shrewsbury, *MCSE+Internet MCSE 2000 CCA Server+
>
> Network Manager
>
> -----Original Message-----
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> Behalf Of *Steve Parr
> *Sent:* Tuesday, March 28, 2006 4:16 PM
> *To:* 'thin@xxxxxxxxxxxxx'
> *Subject:* [THIN] How to setup EMF printing for Presentation Server4?
>
>
>
> Have tried in test lab but not working yet?
>
>
>
> Steve Parr
> Metroland Printing, Publishing and Distributing Ltd.
>
>
>
Other related posts:
